Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BARCLAY MECHANICAL SERVICES INC.

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of BARCLAY MECHANICAL SERVICES INC. in 350 W 700 S, BURLEY, ID 83318 (NAICS 238290). OSHA activity number 345750475.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Barclay Mechanical Services INC. — free Get an email when a new federal OSHA severe-injury report for Barclay Mechanical Services INC. is published. One employer, no account, unsubscribe in one click.
Site address
350 W 700 S
City
BURLEY
State
ID
ZIP
83318
Mailing
PO BOX 360, PAUL, ID 83347
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238290
Employees
5
Ownership type
A

4 citations on file for this inspection.

1926.501 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Jun 22, 2022
Abate by
Jul 19, 2022
Penalty
Initial $7,252 · Current $7,252
29 CFR  1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.   a) On January 25, 2022; employees were exposed to falls of approximately 15 feet while accessing and installing metal covers on roof penetrations and holes on a flat roof without fall protection.    Note* Abatement certification is required for this item.
Recent events (1)
  • — Z (S) $7252

1926.501 B04 I

Serious Gravity 10 1 instance 3 exposed
Issued
Jun 22, 2022
Abate by
Jul 19, 2022
Penalty
Initial $10,151 · Current $10,151
29 CFR  1926.501(b)(4)(i): Each employee on walking/working surfaces was not protected from falling through holes (including skylights), more than six feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes.  a) On January 25, 2022; employees were exposed to falls of approximately 15 feet while installing metal covers over roof penetrations and holes near an unguarded skylight on a flat roof without fall protection.   Note* Abatement certification AND documentation are required for this item.
Recent events (1)
  • — Z (S) $10151

1926.501 B04 II

Serious Gravity 10 1 instance 3 exposed
Issued
Jun 22, 2022
Abate by
Jul 19, 2022
Penalty
Initial $0 · Current $0
29 CFR  1926.501(b)(4)(ii): Each employee on a walking/working surface was not protected from tripping in or stepping into or through holes (including skylights) by covers:   a)  On January 25, 2022; employees were exposed to falls of approximately 15 feet while installing metal covers over roof penetrations and holes on a flat roof without fall protection. Employees were working next to a skylight measuring 32 inches by 57 inches, an eight inch round spot penetration and a hole measuring  36 inches by 36 inches.  Note* Abatement certification AND  documentation are required for this item.
Recent events (1)
  • — Z (S) $0

1926.502 I04

Serious Gravity 10 1 instance 3 exposed
Issued
Jun 22, 2022
Abate by
Jul 19, 2022
Penalty
Initial $0 · Current $0
29 CFR  1926.502(i)(4): All covers were not color coded or marked with the word "HOLE" or "COVER" to provide warning of the hazard:   a) On January 25, 2022; employees were exposed to trips and falls of approximately 15 feet while working around open roof penetrations and holes while installing metal covers on a flat roof without fall protection. Metal covers were not color coded or marked to identify the hazard.     Note* Abatement certification AND documentation are required for this item.
Recent events (1)
  • — Z (S) $0

View Barclay Mechanical Services INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345750475.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.