Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: IPAC STEEL, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of IPAC STEEL, INC. in 60 INDUSTRIAL RD, LODI, NJ 07644 (NAICS 238120). OSHA activity number 345779862.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ipac Steel, INC. — free Get an email when a new federal OSHA severe-injury report for Ipac Steel, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
IPAC STEEL, INC.
Site address
60 INDUSTRIAL RD
City
LODI
State
NJ
ZIP
07644
Mailing
255 SOUTH ST., NEWARK, NJ 07114
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
3
Ownership type
A

4 citations on file for this inspection.

1926.303 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 28, 2022
Penalty
Initial $4,972 · Current $2,735 Reduced
29 CFR 1926.303(b)(1): Grinding machines were not equipped with safety guards in conformance with the requirements of ANSI B7.1-1970, Safety Code for the Use, Care, and Protection of abrasive wheels, and paragraph (d) of this section.  a) Building Front: An employee was exposed to face injuries when the employee was using an angle grinder without the guard, on or about 2/11/22
Recent events (2)
  • — I (S) $2734.6
  • — Z (S) $4972

1926.405 A02 II I

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 28, 2022
Penalty
Initial $4,972 · Current $2,735 Reduced
29 CFR  1926.405(a)(2)(ii)(I):Flexible cords and cables were not protected from damage, sharp corners and projections, or pinch points.   a) Boom Lift: An extension cord was wrapped around the basket without any protection to prevent damage from steel corners, on or about 2/11/22
Recent events (2)
  • — I (S) $2734.6
  • — Z (S) $4972

1926.453 B02 II

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 28, 2022
Penalty
Initial $4,972 · Current $2,735 Reduced
29 CFR  1926.453(b)(2)(ii): Only authorized persons shall operate an aerial lift.  a) 60 Industrial Rd Lodi NJ: An employee was allowed to operate an aerial lift without being trained, on or about 2/11/22.
Recent events (2)
  • — I (S) $2734.6
  • — Z (S) $4972

1926.453 B02 V

Serious Gravity 10 1 instance 1 exposed
Issued
Jul 28, 2022
Penalty
Initial $5,801 · Current $3,191 Reduced
29 CFR 1926.453(b)(2)(v): A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift:  a) Exterior of Building - Front: An employee was exposed to an approximately 30 foot fall hazard while welding and grinding from an articulated boom platform without connecting the lanyard to the boom, on or about 2/11/22.
Recent events (2)
  • — I (S) $3190.55
  • — Z (S) $5801

View Ipac Steel, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345779862.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.