Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: EMCO CHEMICAL DISTRIBUTORS, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of EMCO CHEMICAL DISTRIBUTORS, INC. in 2100 COMMONWEALTH AVE, NORTH CHICAGO, IL 60064 (NAICS 424690). OSHA activity number 345802466.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Emco Chemical Distributors, INC. — free Get an email when a new federal OSHA severe-injury report for Emco Chemical Distributors, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2100 COMMONWEALTH AVE
City
NORTH CHICAGO
State
IL
ZIP
60064
Mailing
2100 COMMONWEALTH AVE, NORTH CHICAGO, IL 60064
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
424690
Employees
300
Ownership type
A

3 citations on file for this inspection.

1910.1052 D02

Serious Gravity 5 1 instance 4 exposed
Issued
Aug 10, 2022
Penalty
Initial $10,360 · Current $5,500 Reduced

Hazardous substances 1730

29 CFR  1910.1052(d)(2): The employer did not perform initial monitoring to determine each employee's exposure to methylene chloride:  a) Compound Room - On or about May 13, 2022, the employer did not perform initial monitoring to determine each employee's exposure to methylene chloride when blending the chemical product to make paint strippers.  No abatement certification is required for this item.
Recent events (2)
  • — I (S) $5500
  • — Z (S) $10360

1910.1052 H01

Serious Gravity 5 1 instance 4 exposed
Issued
Aug 10, 2022
Abate by
Sep 6, 2022
Penalty
Initial $10,360 · Current $7,500 Reduced

Hazardous substances 1730

29 CFR  1910.1052(h)(1): Where needed to prevent methylene chloride induced skin or eye irritation, the employer did not provide clean protective clothing and equipment resistant to methylene chloride, at no cost to the employee, and/or did not ensure that each affected employee used it:  a) Compound Room - On or about May 13, 2022, the employer provided employees work gloves, including Radnor 64056367 (inner glove) and MCR Safety Predator 9761RL (outer glove) that were not rated for methylene chloride, for use when preparing Overflow Stripper/Packaging Stripper No wax (50929), which contained 75 to 100% Methylene Chloride.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEE T), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $7500
  • — Z (S) $10360

1910.138 B

Serious Gravity 5 1 instance 4 exposed
Issued
Aug 10, 2022
Abate by
Sep 6, 2022
Penalty
Initial $0 · Current $0

Hazardous substances 1730

29 CFR  1910.138(b): The employer did not base selection of appropriate hand protection on an evaluation of the performance characteristics of the hand protection relative to the tasks to be performed, conditions present, duration of use, and the hazards and potential hazards identified:  a) Compound Room - On or about May 13, 2022, the employer did not select appropriate hand protection based on the performance characteristics of the hand protection relative to the tasks that were performed. Employee(s) blending chemicals for paint strippers, containing methylene chloride, were provided, and used two pairs of gloves, a polyurethane palm inner glove (Radnor 64056367) and a fully coated premium nitrile on a soft jersey liner outer glove (MCR Safety Predator 9761RL) that were not designed to be resistant to methylene chloride.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEE T), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Emco Chemical Distributors, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345802466.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.