Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CRAFT MASONRY, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CRAFT MASONRY, INC. in 450 N. MAIN ST., WEST BEND, WI 53090 (NAICS 238140). OSHA activity number 345829261.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Craft Masonry, INC. — free Get an email when a new federal OSHA severe-injury report for Craft Masonry, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
CRAFT MASONRY, INC.
Site address
450 N. MAIN ST.
City
WEST BEND
State
WI
ZIP
53090
Mailing
PO BOX 276, SLINGER, WI 53086
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
15
Ownership type
A

5 citations on file for this inspection.

1926.451 B05 II

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Jun 17, 2022
Penalty
Initial $3,646 · Current $0 Reduced
29 CFR  1926.451(b)(5)(ii): The end of a platform greater than 10 feet in length extended over its support more than 18 inches and the platform was not designed and installed so that the cantilevered portion of the platform is able to support employees without tipping, or has guardrails which block employee access to the cantilevered end.  (a) On or about March 11, 2022, at the worksite located at 450 N. Main St., West Bend, WI, the employer did not ensure that a platform greater than 10 feet in length did not extend over its support more than 18 inches, thereby exposing workers to fall hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3646

1926.501 B15

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 17, 2022
Penalty
Initial $4,558 · Current $3,190 Reduced
29 CFR 1926.501(b)(15)  "Walking/working surfaces not otherwise addressed." Except as provided in 1926.500(a)(2) or in 1926.501 (b)(1) through (b)(14), each employee on a walking/working surface 6 feet (1.8 m) or more above lower levels shall be protected from falling by a guardrail system, safety net system, or personal fall arrest system.  (a) On or about March 11, 2022, at the worksite located at 450 N. Main St., West Bend, WI, the employer did not ensure fall protection was used for personnel exposed to a fall hazard. A worker was removing metal ties from the top of a newly erected concrete wall and was exposed to a 13 foot fall hazard.
Recent events (2)
  • — I (S) $3190
  • — Z (S) $4558

1926.503 A01

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Jun 17, 2022
Abate by
Jul 15, 2022
Penalty
Initial $0 · Current $0
29 CFR  1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  (a) On or about March 11, 2022, at the worksite located at 450 N. Main St., West Bend, WI, the employer did not ensure all workers received training in the recognition of fall hazards and use of fall protection, thereby exposing workers to fall hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.701 B

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Jun 17, 2022
Penalty
Initial $4,558 · Current $0 Reduced
29 CFR  1926.701(b): All protruding reinforcing steel, onto and/or into which employees could fall, was not guarded to eliminate the hazard of impalement:  (a) On or about March 11, 2022, at the worksite located at 450 N. Main St., West Bend, WI, the employer did not ensure protruding steel which employees could fall onto or into was guarded. Personnel were working above and accessing the scaffold system near multiple sections of protruding steel that was not guarded, thereby exposing employees to impalement hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4558

1926.1053 B04

Other-than-serious Gravity 5 1 instance 1 exposed
Issued
Jun 17, 2022
Penalty
Initial $3,646 · Current $2,552 Reduced
29 CFR  1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed:  (a) On or about March 11, 2022, at the worksite located at 450 N. Main St., West Bend, WI, the employer did not ensure an adequate means of access was utilized when accessing a scaffold. A platform step ladder measuring approximately six (6 ) feet high was used for access to a scaffold system that was approximately 7 foot 10 inches high, thereby exposing workers to fall hazards.
Recent events (2)
  • — I (O) $2552
  • — Z (S) $3646

View Craft Masonry, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345829261.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.