GRAND PRAIRIE, TX —
OSHA Inspection: OLDCASTLE BUILDINGENVELOPE, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of OLDCASTLE BUILDINGENVELOPE, INC. in 1101 FOUNTAIN PARKWAY, GRAND PRAIRIE, TX 75050 (NAICS 327215). OSHA activity number 345847362.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- OLDCASTLE BUILDINGENVELOPE, INC.
- Site address
- 1101 FOUNTAIN PARKWAY
- City
- GRAND PRAIRIE
- State
- TX
- ZIP
- 75050
- Mailing
- 1101 FOUNTAIN PARKWAY, GRAND PRAIRIE, TX 75050
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327215
- Employees
- 162
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- May 2, 2022
- Abate by
- May 26, 2022
- Penalty
- Initial $14,502 · Current $14,502
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented, and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or before March 21, 2022, employees cleaning sensors, changing out spacer material, and/or repairing or replacing the needle within the robotic head unit of the Lisec VSA-35/25 Fully Automated Applicator were exposed to a struck-by hazard when: (a) Specific hazardous energy control procedures were developed and documented but only listed one of the three energy sources that power the machine and did not include the blocking of the robotic head unit so it would not unexpectedly fall due to gravity. (b) Specific Hazardous energy control procedures were not being utilized in that employees relied on interlocks to shut down the machine and not locking it out.
Recent events (2)
- — I (S) $14502
- — Z (S) $14502
1910.147 C07 I
- Issued
- May 2, 2022
- Abate by
- May 26, 2022
- Penalty
- Initial $14,502 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: (a) On or before March 21, 2022, the employer did not provide adequate training in that machine operators who are required to work on the Lisec VSA-35/25 Fully Automated Applicator are only trained as affected employees and not authorized employees thereby exposing them to a struck-by hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $14502
1910.147 D03
- Issued
- May 2, 2022
- Abate by
- May 26, 2022
- Penalty
- Initial $14,502 · Current $14,502
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): (a) On or about March 21, 2022, while locking and tagging out the Lisec VSA-35/25 Fully Automated Applicator all energy isolating devices were not physically located and operated in such a manner as to isolate the VSA machine from the energy sources exposing employees working on it to a struck-by hazard.
Recent events (2)
- — I (S) $14502
- — Z (S) $14502
1910.147 D05 I
- Issued
- May 2, 2022
- Abate by
- May 26, 2022
- Penalty
- Initial $14,502 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(5)(i): All potentially hazardous stored or residual energy was not relieved, disconnected, restrained or otherwise rendered safe after the application of lockout or tagout devices to energy isolating devices: (a) On or about March 21, 2022, while locking and tagging out the Lisec VSA-35/25 Fully Automated Applicator all potentially hazardous stored or residual energy was not relieved, disconnected, restrained, or otherwise rendered safe after the application of lockout and tagout devices to energy isolating devices exposing employees working on it to a struck-by hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $14502
More inspections at Oldcastle Buildingenvelope, INC.
View Oldcastle Buildingenvelope, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 327215)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345847362.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.