NORTH HAVEN, CT —
OSHA Inspection: JESKEY, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of JESKEY, LLC in 69 DODGE AVENUE, NORTH HAVEN, CT 06473 (NAICS 332721). OSHA activity number 345859078.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JESKEY, LLC
- Site address
- 69 DODGE AVENUE
- City
- NORTH HAVEN
- State
- CT
- ZIP
- 06473
- Mailing
- 69 DODGE AVENUE, NORTH HAVEN, CT 06473
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332721
- Employees
- 22
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.133 A03
- Issued
- Sep 1, 2022
- Abate by
- Oct 20, 2022
- Penalty
- Initial $3,315 · Current $2,321 Reduced
General-duty citation text
29 CFR 1910.133(a)(3):The employer shall ensure that each affected employee who wears prescription lenses while engaged in operations that involve eye hazards wears eye protection that incorporates the prescription in its design, or wears eye protection that can be worn over the prescription lenses without disturbing the proper position of the prescription lenses or the protective lenses. WORKSHOP: The employer had not provided the employee who wears prescription eyeglasses/lenses appropriate eye protection to avoid flying metal particles and liquid chemicals.
Recent events (2)
- — I (S) $2320.5
- — Z (S) $3315
1910.212 A03 II
- Issued
- Sep 1, 2022
- Abate by
- Oct 20, 2022
- Penalty
- Initial $4,144 · Current $2,901 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii):Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): WORKSHOP: The point of operation of the indexing rotating chuck of the #10 Brown and Sharpe screw machine was partially unguarded during the development process.
Recent events (2)
- — I (S) $2900.8
- — Z (S) $4144
1910.219 C02 I
- Issued
- Sep 1, 2022
- Abate by
- Oct 20, 2022
- Penalty
- Initial $4,144 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i):All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: WORKSHOP: The rotating horizontal shaft of the #10 Brown and Sharpe screw machine was partially unguarded during the development stage.
Recent events (2)
- — I (S) $0
- — Z (S) $4144
1910.219 C04 I
- Issued
- Sep 1, 2022
- Abate by
- Oct 20, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4)(i):Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: WORKSHOP: The horizontal shaft end at the #10 Brown and Sharpe screw machine was partially unguarded during the development stage.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 E01
- Issued
- Sep 1, 2022
- Abate by
- Oct 20, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1):Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): WORKSHOP: The employer had not established and implemented a written hazard communication program including the Globalized Harmonized System where employees were required to work with chemicals, such as (but not limited to) Advantage cut 201 cutting oil.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Jeskey, LLC
View Jeskey, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332721)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345859078.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.