EL PASO, TX —
OSHA Inspection: FARMERS SELECT LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FARMERS SELECT LLC in 7321 NORTH LOOP DRIVE, EL PASO, TX 79915 (NAICS 311520). OSHA activity number 345880934.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FARMERS SELECT LLC
- Site address
- 7321 NORTH LOOP DRIVE
- City
- EL PASO
- State
- TX
- ZIP
- 79915
- Mailing
- 7321 NORTH LOOP DRIVE, EL PASO, TX 79915
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311520
- Employees
- 50
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Jun 8, 2022
- Penalty
- Initial $5,801 · Current $4,000 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees by exposing employees to struck-by and/or caught-between hazards: On or about April 6, 2022, the employer failed to ensure all equipment had warning signs/labels and E-Stops devices that were easily identifiable in the immediate vicinity of such locations unless guarded by location, position, or guards and/or other engineering controls. Equipment included but was not limited to the Alpine conveyor.
Recent events (2)
- — I (S) $4000
- — Z (S) $5801
1910.22 D01
- Issued
- Jun 8, 2022
- Abate by
- Sep 30, 2022
- Penalty
- Initial $8,702 · Current $6,000 Reduced
General-duty citation text
29 CFR 1910.22(d)(1): The employer did not ensure that walking-working surfaces were inspected, regularly and as necessary, and maintained in a safe condition. On or about April 06, 2022, in the Milk Cooler Area, the employer did not ensure that walking-working surfaces were inspected, regularly and as necessary, and maintained in a safe condition. The highly traveled working surface presented a tripping hazard to employees as well as hazardous condition for operating powered industrial vehicles.
Recent events (3)
- — P (S) $6000
- — I (S) $6000
- — Z (S) $8702
1910.178 L06
- Issued
- Jun 8, 2022
- Penalty
- Initial $5,801 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.178(l)(6):The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation. On or about April 06, 2022, the employer did not certify that each operator had been trained on operating powered industrial trucks. This condition exposed employees to struck-by and crushed-by hazards.
Recent events (2)
- — I (S) $4000
- — Z (S) $5801
1910.219 D01
- Issued
- Jun 8, 2022
- Penalty
- Initial $7,252 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): On or about April 06, 2022, in the Filler Room / Blow Mold Area, the Alpine Conveyor had pulleys that were not guarded. This exposed employees to caught-by hazards.
Recent events (2)
- — I (S) $5000
- — Z (S) $7252
1910.303 G02 I
- Issued
- Jun 8, 2022
- Abate by
- Aug 15, 2022
- Penalty
- Initial $8,702 · Current $6,000 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i):Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): On or about April 06, 2022, in the Maintenance / Utility Room, the electrical panel cover on the main electrical breaker box was missing. This condition exposed employees to electrical shock hazards.
Recent events (3)
- — P (S) $6000
- — I (S) $6000
- — Z (S) $8702
More inspections at Farmers Select LLC
View Farmers Select LLC's full OSHA safety record →
More inspections in this industry (NAICS 311520)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345880934.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.