BRIDGEVIEW, IL —
OSHA Inspection: D & M WELDING, INC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of D & M WELDING, INC in 8314 SOUTH 77TH AVENUE, BRIDGEVIEW, IL 60455 (NAICS 332312). OSHA activity number 345918668.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- D & M WELDING, INC
- Site address
- 8314 SOUTH 77TH AVENUE
- City
- BRIDGEVIEW
- State
- IL
- ZIP
- 60455
- Mailing
- 8314 SOUTH 77TH AVENUE, BRIDGEVIEW, IL 60455
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 4
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 C02 II
- Issued
- Sep 9, 2022
- Penalty
- Initial $1,865 · Current $933 Reduced
General-duty citation text
29 CFR 1910.134(c)(2)(ii): The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user: a) D & M Welding, Inc. located at 8314 S 77th Ave., Bridgeview, IL 60455: On or about April 26, 2022, the employer allowed the voluntary use of elastomeric respirators and did not establish the elements of a written respiratory program.
Recent events (2)
- — I (S) $932.5
- — Z (S) $1865
1910.134 E01
- Issued
- Sep 9, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) D & M Welding, Inc. located at 8314 S 77th Ave., Bridgeview, IL 60455: On or about April 26, 2022, the employer allowed voluntary use of elastomeric respirators and did not ensure employees had been medically evaluated prior to wearing the respirators.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K06
- Issued
- Sep 9, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer: a) D & M Welding, Inc. located at 8314 S 77th Ave., Bridgeview, IL 60455: On or about April 26, 2022, the employer allowed the voluntary use of filtering facepiece respirators and elastomeric respirators and had not provided employees with the information contained in Appendix D.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 E01
- Issued
- Sep 9, 2022
- Penalty
- Initial $1,865 · Current $933 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program which included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): a) D & M Welding, Inc. located at 8314 S 77th Ave., Bridgeview, IL 60455: On or about April 26, 2022, the employer had not implemented a written hazard communication program while employees were exposed to chemical hazards including, but not limited to, paint primer and compressed gases.
Recent events (2)
- — I (S) $932.5
- — Z (S) $1865
1910.1200 G08
- Issued
- Sep 9, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work shift to employees when they were in their work area(s): a) D & M Welding, Inc. located at 8314 S 77th Ave., Bridgeview, IL 60455: On or about April 26, 2022, the employer did not maintain copies of Safety Data Sheets (SDSs) for chemicals used on site. Employees were exposed to chemical hazards including, but not limited to, paint primer and compressed gases.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Sep 9, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) D & M Welding, Inc. located at 8314 S 77th Ave., Bridgeview, IL 60455: On or about April 26, 2022, the employer had not provided hazard communication training to employees regarding chemical hazards in their workplace. Employees were exposed to chemical hazards including, but not limited to, paint primer and compressed gases.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at D & M Welding, INC
View D & M Welding, INC's full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345918668.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.