MEREDOSIA, IL ·
OSHA Inspection: TARPS MANUFACTURING, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of TARPS MANUFACTURING, INC. in 1000 ILLINOIS 104, MEREDOSIA, IL 62665 (NAICS 314910). OSHA activity number 345919880.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TARPS MANUFACTURING, INC.
- Site address
- 1000 ILLINOIS 104
- City
- MEREDOSIA
- State
- IL
- ZIP
- 62665
- Mailing
- 1000 ILLINOIS 104, MEREDOSIA, IL 62665
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 314910
- Employees
- 10
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1910.157 E03
- Issued
- Aug 3, 2022
- Abate by
- Aug 25, 2022
- Penalty
- Initial $1,865 · Current $1,212 Reduced
General-duty citation text
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: On or about June 9, 2022, employees working in the Production Area were exposed to fire hazards due to the fire extinguishers were not maintained.
Recent events (2)
- · I (S) $1212.25
- · Z (S) $1865
1910.303 B02
- Issued
- Aug 3, 2022
- Abate by
- Aug 25, 2022
- Penalty
- Initial $2,486 · Current $1,616 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: On or about June 9, 2022, employees were exposed to electrical hazards due to electrical equipment not being used in accordance with its listing or labeling: a. ADFAST Grommet Machine, Model Eagle III 2.0, Serial Number III192-01-22, located on the dividing wall of the production area was plugged into a red extension cord which was plugged into a relocatable power tap which was plugged into the wall outlet. The relocatable power tap was not being used for its intended purpose. b. Commercial Electric fan was plugged into an orange pigtail extension cord which was plugged into a yellow extension cord which was plugged into a relocatable power tap which was plugged into the wall outlet. The relocatable power tap was not being used for its intended purpose. c. Sewing Machine, Model 37U2358, Serial Number U20-579001, was plugged into a yellow extension cord which was plugged into a relocatable power tap which was plugged into the wall outlet. The relocatable power tap was not being used for its intended purpose.
Recent events (2)
- · I (S) $1615.9
- · Z (S) $2486
1910.303 G01
- Issued
- Aug 3, 2022
- Abate by
- Aug 18, 2022
- Penalty
- Initial $2,486 · Current $1,616 Reduced
General-duty citation text
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: On or about June 9, 2022, employees were exposed to electrical hazards due to the lack of sufficient access and working space: a. Electrical panels in the Production Area that supply power to various pieces of equipment and lighting were blocked by cardboard boxes. b. Electrical panels in the High Voltage Room that supply power to various pieces of equipment and lights were blocked by pieces of plywood, cardboard boxes and other material.
Recent events (2)
- · I (S) $1615.9
- · Z (S) $2486
1910.305 G01 IV A
- Issued
- Aug 3, 2022
- Abate by
- Aug 25, 2022
- Penalty
- Initial $2,486 · Current $1,616 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: On or about June 9, 2022, employees were exposed to electrical hazards due to flexible cords were used as a substitute for permanent wiring for machines: a. Sewing Machine, Model 37U2358, Serial Number U20-579001, was plugged into a yellow extension cord that was plugged into a relocatable power tap which was plugged into the wall outlet. b. Sinclair Hoogs Cutter, Type ST-2000-S, Serial Number 273-103, was plugged into a black extension cord that was fastened to the ceiling, wall, and metal conduit with zip ties which was plugged into the wall outlet.
Recent events (2)
- · I (S) $1615.9
- · Z (S) $2486
1910.305 G01 IV D
- Issued
- Aug 3, 2022
- Abate by
- Aug 18, 2022
- Penalty
- Initial $2,486 · Current $1,616 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(D): Flexible cords were attached to building surfaces: On or about June 9, 2022, employees working in the Production Area were exposed to electrical hazards due to the Sinclair Hoogs Cutter, Type ST-2000-S, Serial Number 273-103, was plugged into a black extension cord that was fastened to the ceiling, wall, and metal conduit with zip ties which was plugged into the wall outlet.
Recent events (2)
- · I (S) $1615.9
- · Z (S) $2486
1910.22 A01
- Issued
- Aug 3, 2022
- Abate by
- Sep 23, 2022
- Penalty
- Initial $349 · Current $227 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): The employer had not ensured that all places of employment, passageways, storerooms, service rooms, and walking-working surfaces were kept in a clean, orderly, and sanitary condition: On or about April 26, 2022, employees were exposed to respiratory/sinus issues because the employer had not implemented a housekeeping program to control the growth of mold in the facility.
Recent events (2)
- · I (O) $226.85
- · Z (O) $349
More inspections in this industry (NAICS 314910)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 345919880.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.