CANTON, OH —
OSHA Inspection: CANTON DROP FORGE, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CANTON DROP FORGE, INC. in 4575 SOUTHWAY ST. SW, CANTON, OH 44706 (NAICS 332111). OSHA activity number 345965388.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CANTON DROP FORGE, INC.
- Site address
- 4575 SOUTHWAY ST. SW
- City
- CANTON
- State
- OH
- ZIP
- 44706
- Mailing
- 4575 SOUTHWAY ST. SW, CANTON, OH 44706
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332111
- Employees
- 175
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Sep 9, 2022
- Penalty
- Initial $13,052 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about May 12, 2022 employees were performing a service task on 1401 Steam Hammer, placing keys and liners on 3016 dies without utilizing appropriate energy control procedures. The employer did not ensure the 1401 steam hammer was locked out prior to the service task exposing the employees to struck by hazards.
Recent events (3)
- — F (S) $0
- — C (S) $13052
- — Z (S) $13052
1910.147 D
- Issued
- Sep 9, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): On or about May 12, 2022 the employer did not ensure employees performing a service task on 1401 Steam Hammer, placing keys and liners on 3016 dies, implemented energy control procedures by; preparing the steam hammer for shutdown [per 1910.147(d)(1) requirements], turning off the machine [(d)(2)], isolating the machine from the energy source [(d)(3)], affixing a lockout device [(d)(4)(i)], and verifying de-energization and isolation had been accomplished prior to performing the service task [(d)(6)].
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.147 F03 I
- Issued
- Sep 9, 2022
- Abate by
- Jan 22, 2024
- Penalty
- Initial $13,052 · Current $7,831 Reduced
General-duty citation text
29 CFR 1910.147(f)(3)(i): A procedure was not utilized to afford the employees a level of protection equivalent to that provided by the implementation of a personal lockout or tagout device when servicing and/or maintenance was performed by a crew: On or about May 12, 2022 employees were performing a service task on 1401 Steam Hammer, placing keys and liners on 3016 dies without utilizing appropriate energy control procedures. The alternative energy control procedure did not require all exposed authorized employees to affix personal locks to the energy control device.
Recent events (3)
- — F (S) $7831.2
- — C (S) $13052
- — Z (S) $13052
1910.147 F03 II D
- Issued
- Sep 9, 2022
- Abate by
- Jan 22, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: On or about May 12, 2022 employees were performing a service task on 1401 Steam Hammer, placing keys and liners on 3016 dies and the employer did not require all authorized employees to affix personal locks to the energy control device.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
More inspections at Canton Drop Forge, INC.
View Canton Drop Forge, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332111)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345965388.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.