Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: AMERICAN SURFACING MATERIALS, LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of AMERICAN SURFACING MATERIALS, LLC in 2101 BAKER BLVD, TEMPLE, TX 76501 (NAICS 326130). OSHA activity number 345967525.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch American Surfacing Materials, LLC — free Get an email when a new federal OSHA severe-injury report for American Surfacing Materials, LLC is published. One employer, no account, unsubscribe in one click.
Site address
2101 BAKER BLVD
City
TEMPLE
State
TX
ZIP
76501
Mailing
2101 BAKER BLVD, TEMPLE, TX 76501
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326130
Employees
32
Ownership type
A

4 citations on file for this inspection.

1910.134 D01 II

Serious Gravity 1 1 instance 4 exposed
Issued
Sep 19, 2022
Abate by
Oct 14, 2022
Penalty
Initial $4,351 · Current $2,611 Reduced
29 CFR  1910.134(d)(1)(ii): The employer did not select and use a NIOSH-certified respirator in compliance with the conditions of its certification.  On or about May 17, 2022, and at times prior thereto, employees were required to use a Full Face respirator, Moaron P6000, to protect against chemical vapors which was not a NIOSH-certified respirator, exposing the employees to various respiratory hazards.
Recent events (2)
  • — I (S) $2610.6
  • — Z (S) $4351

1910.134 F02

Serious Gravity 1 1 instance 4 exposed
Issued
Sep 19, 2022
Abate by
Oct 14, 2022
Penalty
Initial $4,351 · Current $2,611 Reduced
29 CFR  1910.134(f)(2): The employer shall ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter.  On or about May 17, 2022, and at times prior thereto, the employer did not provide initial and/or annual fit tests to all employees required to wear respirators. The employer required employees to wear N95 filtering facepieces and Full Face respirators to protect against chemical vapors, exposing the employees to various respiratory hazards.
Recent events (2)
  • — I (S) $2610.6
  • — Z (S) $4351

1910.134 G01 II

Serious Gravity 1 1 instance 1 exposed
Issued
Sep 19, 2022
Abate by
Oct 14, 2022
Penalty
Initial $4,351 · Current $2,611 Reduced
29 CFR  1910.134(g)(1)(ii):Corrective glasses, goggles or other personal protective equipment were worn in a manner that interfered with the seal of the respirator facepiece:  On or about May 17, 2022, and at times prior thereto, an employee was wearing a Full Face respirator while using corrective glasses which interfered with the seal of the respirator, exposing the employee to various respiratory hazards.
Recent events (2)
  • — I (S) $2610.6
  • — Z (S) $4351

1910.134 C02 I

Other-than-serious 1 instance 2 exposed
Issued
Sep 19, 2022
Abate by
Oct 14, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible.  On or about May 17, 2022, and at times prior thereto, employees in the Casting Department were permitted to voluntarily use N95 filtering facepiece respirators without being provided with the information contained in Appendix D, exposing the employees to respiratory hazards.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View American Surfacing Materials, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345967525.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.