Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SAVENCIA CHEESE USA, LLC

Programmed Related inspection · Safety discipline

On , OSHA opened a programmed Related safety inspection of SAVENCIA CHEESE USA, LLC in 157 WEST JACKSON STREET, NEW HOLLAND, PA 17557 (NAICS 311513). OSHA activity number 346012099.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Savencia Cheese USA, LLC — free Get an email when a new federal OSHA severe-injury report for Savencia Cheese USA, LLC is published. One employer, no account, unsubscribe in one click.
Site address
157 WEST JACKSON STREET
City
NEW HOLLAND
State
PA
ZIP
17557
Mailing
400 SOUTH CUSTER AVE, NEW HOLLAND, PA 17557
Inspection type
Programmed Related (J)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311513
Employees
186
Ownership type
A

7 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 2 instances 8 exposed
Issued
Nov 30, 2022
Abate by
Mar 1, 2023
Penalty
Initial $10,360 · Current $10,360
OSH ACT of 1970 Section (5)(a)(1):The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees from caught in & struck by hazards created by unsafe utilization of racking systems:  (b) 157 West Jackson Street, New Holland, PA, Cold Storage Room (cooler) - On or about September 1, 2022, the storage racking system was not properly anchored to the floor. Employees were exposed to crushing and struck by hazards.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $10360
  • — Z (S) $10360

1910.22 C

Serious Gravity 5 1 instance 40 exposed
Issued
Nov 30, 2022
Abate by
Mar 1, 2023
Penalty
Initial $10,360 · Current $10,360
29 CFR  1910.22(c): The employer did not provide, and ensure each employee uses, a safe means of access and egress to and from walking-working surfaces.  (a)  157 West Jackson Street, Silo 30c, interior of milk receiving area - On or about June 9, 2022, employees accessing the silo alcove to perform maintenance work had to climb over and onto pipes to access the silo alcove, employees were exposed to a fall hazard.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $10360
  • — Z (S) $10360

1910.23 D02

Serious Gravity 5 1 instance 18 exposed
Issued
Nov 30, 2022
Abate by
Mar 1, 2023
Penalty
Initial $8,287 · Current $8,287
29 CFR  1910.23(d)(2): 29 CFR 1910.23(d)(2): The employer did not ensure that the minimum perpendicular distance from the centerline of the steps or rungs, or grab bars, or both, to the nearest permanent object in back of the ladder is 7 inches (18 cm), except for elevator pit ladders, which have a minimum perpendicular distance of 4.5 inches (11 cm).   (a) 157 West Jackson Street, New Holland, PA, building exterior next to compressor room door and yellow compressed gas storage cage - The top step of the yellow fixed ladder used for roof access with a height of approximately 13 feet is less than 7 inches away from the rain gutter. Employees are exposed to fall hazards.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $8287
  • — Z (S) $8287

1910.37 A04

Other-than-serious Gravity 1 1 instance 40 exposed
Issued
Nov 30, 2022
Abate by
Mar 1, 2023
Penalty
Initial $6,215 · Current $0 Reduced
29 CFR  1910.37(a)(4): Safeguard(s) designed to protect employees during an emergency (e.g., sprinkler systems, alarm systems, fire doors, exit lighting), were not in proper working order at all times:   (a) 157 West Jackson Street, New Holland PA, interior of the milk receiving area, above Silo 30c alcove, - On or about June 9, 2022, the emergency lighting at Silo 30c was not in proper working order at all times, including at the time of inspection. Employees were exposed to fire and smoke inhalation hazards due to the emergency lighting not being in working order.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (O) $0
  • — Z (S) $6215

1910.101 B

Serious Gravity 1 1 instance 18 exposed
Issued
Nov 30, 2022
Abate by
Mar 1, 2023
Penalty
Initial $6,215 · Current $4,493 Reduced
29 CFR  1910.101(b): The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tank cars, or motor vehicle cargo tanks were not in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in CFR 1910.6:  (a)  157 West Jackson Street, New Holland PA, fenced in area next to compressor room door - On or about June 9, 2022 two compressed gas cylinders were stored without the protective caps in place.   Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $4493
  • — Z (S) $6215

1910.146 G02

Deleted Serious Gravity 10 1 instance 40 exposed
Issued
Nov 30, 2022
Abate by
Dec 19, 2022
Penalty
Initial $14,502 · Current $0 Reduced
29 CFR  1910.146(g)(2): Training was not provided to each affected employee entering a permit-required confined space:   (a) 157 West Jackson Street, New Holland PA, Interior of Milk Receiving Area, Silo 50 - On or about June 22, 2022, Silo 50 was identified as a permit required confined space on the FDLE Confined Space Program; however, the employer did not provide permit required confined space training for employees entering Silo 50 to perform maintenance work.  Employees were exposed to hazards to include caught in and engulfment hazards.  Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $14502

1910.219 C02 I

Deleted Serious Gravity 5 1 instance 40 exposed
Issued
Nov 30, 2022
Abate by
Dec 19, 2022
Penalty
Initial $10,360 · Current $0 Reduced
29 CFR  1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting:  (a) 157 West Jackson Street, New Holland, PA, Interior of Milk Receiving Area, Silo 30C, floor level in front of the silo -  On or about June 9, 2022, the whey pump motor contained a 5-inch long horizontal shaft which was approximately 2-inches in diameter, and within 1-foot from ground level, was not adequately enclosed with appropriate guarding. Employees were exposed to caught-in hazards.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $0
  • — Z (S) $10360

View Savencia Cheese USA, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346012099.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.