BUFFALO GROVE, IL —
OSHA Inspection: G&L REMODELING SERVICE INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of G&L REMODELING SERVICE INC. in 6 FOXHILL DRIVE, BUFFALO GROVE, IL 60089 (NAICS 238160). OSHA activity number 346026735.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- G&L REMODELING SERVICE INC.
- Site address
- 6 FOXHILL DRIVE
- City
- BUFFALO GROVE
- State
- IL
- ZIP
- 60089
- Mailing
- 214 ADAMS STREET, MARENGO, IL 60152
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Sep 30, 2022
- Penalty
- Initial $4,351 · Current $2,600 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee was using appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation. a) On June 16, 2022 employees who were required to use pneumatic nail guns to install roofing shingles, were not equipped with and required to wear eye protection. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $2600
- — Z (S) $4351
1926.501 B13
- Issued
- Sep 30, 2022
- Penalty
- Initial $4,351 · Current $2,600 Reduced
General-duty citation text
29 CFR 1926.501(b) (13): The employer did not ensure that each employee engaged in residential roofing activities with unprotected sides and edges (6) feet or more above lower levels, was protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. a) June 16, 2022, employees engaged in residential roofing activities were exposed to falls of over (8) eight feet. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $2600
- — Z (S) $4351
1926.1053 B01
- Issued
- Sep 30, 2022
- Penalty
- Initial $4,351 · Current $2,600 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access: a) On June 16, 2022 multiple ladders used by employees to gain access to the working surface did not have their side rails extended at least 3 feet above the landed surface.
Recent events (2)
- — I (S) $2600
- — Z (S) $4351
1926.503 B01
- Issued
- Sep 30, 2022
- Abate by
- Apr 3, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer: a) June 16, 2022, the employer did not maintain records or certification of fall protection training for employees exposed to fall hazards. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at G&L Remodeling Service INC.
View G&L Remodeling Service INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238160)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346026735.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.