Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CARDOZA CONSTRUCTION LLC

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of CARDOZA CONSTRUCTION LLC in 5964 S STATE HWY NN, ROGERSVILLE, MO 65742 (NAICS 236220). OSHA activity number 346092463.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Cardoza Construction LLC — free Get an email when a new federal OSHA severe-injury report for Cardoza Construction LLC is published. One employer, no account, unsubscribe in one click.
Site address
5964 S STATE HWY NN
City
ROGERSVILLE
State
MO
ZIP
65742
Mailing
1836 NORTH DEFFER DRIVE, NIXA, MO 65714
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
5
Ownership type
A

3 citations on file for this inspection.

1926.403 B02

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 29, 2022
Abate by
Aug 24, 2022
Penalty
Initial $7,252 · Current $3,626 Reduced
29 CFR  1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification:  At a worksite located at 5964 S State Hwy NN, Rogersville MO 65742: Employees were exposed to electrical shock hazards due to the electrical outlet box being plugged into another set of extension cords in series and not in accordance with the listing, labeling, and certification of the extension cords. On or about February 9, 2022, an electrical outlet box was being used by employees to power a Bosch table saw for the purpose of cutting engineered plastic 2x6 boards. The outlet box was powered by two extension cords that were plugged together in series and run back an electrical wall receptacle.
Recent events (2)
  • — I (S) $3626
  • — Z (S) $7252

1926.404 B01 III C

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 29, 2022
Abate by
Aug 24, 2022
Penalty
Initial $7,252 · Current $3,626 Reduced
29 CFR  1926.404(b)(1)(iii)(C): Where an assured equipment grounding conductor program was being utilized, the employer did not ensure that each cord set, attachment cap, plug and receptacle of cord sets, and any equipment connected by cord and plug, except cord sets and receptacles which are fixed and not exposed to damage, were visually inspected before each day's use for external defects, such as deformed or missing pins or insulation damage, and for indications of possible internal damage.  At a worksite located at 5964 S State Hwy NN, Rogersville MO 65742: On or about February 9, 2022, a flexible cord and cable (extension cord) were being used to power an outlet box that was connected in series to a Bosch table saw. The flexible cord and cable was missing a ground pin and exposed employees to electrical shock hazards.
Recent events (2)
  • — I (S) $3626
  • — Z (S) $7252

1926.405 G02 IV

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 29, 2022
Abate by
Aug 24, 2022
Penalty
Initial $7,252 · Current $3,626 Reduced
29 CFR  1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws:  At a worksite located at 5964 S State Hwy NN, Rogersville MO 65742: On or about February 9, 2022, flexible work and cable (extension cord) was plugged in series to an electrical outlet box was being used by employees to power a Bosch table saw. Employees were exposed to electrical shock hazards when the extension cord was experiencing strain relief while it was connected to live parts of electrical equipment.
Recent events (2)
  • — I (S) $3626
  • — Z (S) $7252

View Cardoza Construction LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346092463.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.