Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ABANA CO. LTD.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ABANA CO. LTD. in 9850 PUTI TAINOBUI AVE, SAIPAN, MP 96950 (NAICS 721110). OSHA activity number 346121817.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Abana CO. LTD. — free Get an email when a new federal OSHA severe-injury report for Abana CO. LTD. is published. One employer, no account, unsubscribe in one click.
Establishment
ABANA CO. LTD.
Site address
9850 PUTI TAINOBUI AVE
City
SAIPAN
State
MP
ZIP
96950
Mailing
PMB A17 BOX 10001, SAIPAN, MP 96950
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
721110
Employees
7
Ownership type
A

4 citations on file for this inspection.

1910.305 G01 IV B

Serious Gravity 1 2 instances 2 exposed
Issued
Sep 29, 2022
Penalty
Initial $1,865 · Current $1,865
29 CFR  1910.305(g)(1)(iv)(B): Flexible cords and/or cables were run through holes in walls, ceilings, or floors:  a. In the Laundry Room/Boiler Room: The flexible cord used to power the split unit air condition in the Spa was run through the wall. Employees were exposed to electrical and fire hazards.  b. In the Lobby: The flexible cord used to power the security camera was run through the wall. Employees were exposed to electrical and fire hazards.
Recent events (1)
  • — Z (S) $1865

1910.305 G02 II

Serious Gravity 1 1 instance 2 exposed
Issued
Sep 29, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap:  In the Laundry/Boiler Room: The flexible cord providing power to the split AC unit in the Spa was spliced. Employees were exposed to electrical and fire  hazards.
Recent events (1)
  • — Z (S) $0

1910.303 F02

Other-than-serious 1 instance 2 exposed
Issued
Sep 29, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:  In the Laundry/Boiler Room: The circuit breaker panel was not labeled. Employees were exposed to electrical hazards.
Recent events (1)
  • — Z (O) $0

1910.305 G02 III

Other-than-serious 1 instance 2 exposed
Issued
Sep 29, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws:  In the Laundry/Boiler Room: The flexible cord used to power the split AC unit in the spa had the outer insulation pulled from the plug. Employees were exposed to electrical hazards.
Recent events (1)
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346121817.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.