POST FALLS, ID —
OSHA Inspection: T & R MASONRY, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of T & R MASONRY, LLC in 2002 W. SELTICE WAY, POST FALLS, ID 83854 (NAICS 238140). OSHA activity number 346134273.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- T & R MASONRY, LLC
- Site address
- 2002 W. SELTICE WAY
- City
- POST FALLS
- State
- ID
- ZIP
- 83854
- Mailing
- 11937 DYNAMITE LN., KUNA, ID 83634
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 5
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.451 B01 I
- Issued
- Jan 11, 2023
- Abate by
- Jan 31, 2023
- Penalty
- Initial $4,972 · Current $4,972
General-duty citation text
29 CFR 1926.451(b)(1)(i): Each platform unit (e.g., scaffold plank, fabricated plank, fabricated deck, or fabricated platform) was not installed so that the space between adjacent units and the space between the platform and the uprights were no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary. a) 2002 W. Seltice Way - On or about August 8, 2022, employees performing masonry working from a tubular welded frame scaffold near an opening where the planking was not complete up to the top rail placed at a 45 degree angle, leaving a triangular shaped fall opening. Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (3)
- — A (S) $4972
- — I (S) $2734.6
- — Z (S) $4972
1926.451 G04
- Issued
- Jan 11, 2023
- Abate by
- Jan 31, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(g)(4): Guardrail systems installed to meet the requirements of this section did not comply with the provisions listed in subparagraphs (i) through (xv) of this paragraph. a) 2002 W. Seltice Way - On or about August 8, 2022, employees performing masonry working from a tubular welded frame scaffold near an opening with an unprotected edge on the third-tier south side corner, with a top rail installed, and the mid-rail or equivalent not installed, exposing employees to fall hazards greater than ten feet. Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 E09 IV
- Issued
- Jan 11, 2023
- Abate by
- Feb 1, 2023
- Penalty
- Initial $4,144 · Current $4,144
General-duty citation text
29 CFR 1926.451(e)(9)(iv): Cross braces on tubular welded frame scaffolds were used as a means of access or egress. a) 2002 W. Seltice Way - On or about August 8, 2022, the employer did not protect employees from injury in that masonry employees were observed climbing and utilizing cross bracing members of a three-tier tubular welded frame scaffold as a means of access and egress, exposing employees to fall hazards of greater than 10 feet. Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (3)
- — A (S) $4144
- — I (S) $2279.2
- — Z (S) $4144
1926.454 A
- Issued
- Jan 11, 2023
- Abate by
- Feb 1, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a) 2002 W. Seltice Way - On or about August 8, 2022, the employer did not ensure that employees were provided training on hazards associated with recognizing hazards associated with tubular welded frame scaffolding used for masonry tasks, exposing employees to fall hazards of greater than 10 feet. Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 B10
- Issued
- Jan 11, 2023
- Abate by
- Feb 1, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(b)(10): Scaffold components manufactured by different manufacturers were intermixed such that the components fit together with force and the scaffold's structural integrity was not maintained by the user: a) 2002 W. Seltice Way - On or about August 8, 2022, the employer utilized metal lacing wire to secure scaffold components in lieu of connecting pins. Scaffold components were intermixed with other types of scaffold components. Abatement Note: Abatement certification is required for this item. See enclosed "Certification of Corrective Actions Worksheet."
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at T & R Masonry, LLC
View T & R Masonry, LLC's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346134273.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.