JAMESTOWN, NY —
OSHA Inspection: INTERNATIONAL ORDNANCE TECHNOLOGIES INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of INTERNATIONAL ORDNANCE TECHNOLOGIES INC. in 101 HARRISON STREET, JAMESTOWN, NY 14701 (NAICS 332999). OSHA activity number 346154271.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INTERNATIONAL ORDNANCE TECHNOLOGIES INC.
- Site address
- 101 HARRISON STREET
- City
- JAMESTOWN
- State
- NY
- ZIP
- 14701
- Mailing
- 101 HARRISON STREET, JAMESTOWN, NY 14701
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 25
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.134 C
- Issued
- Sep 23, 2022
- Abate by
- Oct 26, 2022
- Penalty
- Initial $3,315 · Current $1,650 Reduced
General-duty citation text
29 CFR 1910.134(c): The employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use: a) Heat Treat Area - On or about 8/17/2022, employees were required by the employer to wear Northern Safety 9200 N95 filtering face-piece respirators while working at the Heat Treat Furnance to protect them from soot particulate. The employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use including selection, medical evaluation, fit-testing, training, and inspection. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $1650
- — C (S) $3315
- — Z (S) $3315
1910.134 E01
- Issued
- Sep 23, 2022
- Abate by
- Oct 26, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) Heat Treat Area - On or about 8/17/2022, employees were required by the employer to wear Northern Safety 9200 N95 filtering face-piece respirators while operating the Heat Treat furnace. The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1910.134 F02
- Issued
- Sep 23, 2022
- Abate by
- Oct 26, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: a) Heat Treat Area - On or about 8/17/2022, employees were required by the employer to wear Northern Safety 9200 N95 filtering face-piece respirators while operating the Heat Treat furnace. Employee(s) were not fit tested prior to initial use of the respirator. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1910.134 K03
- Issued
- Sep 23, 2022
- Abate by
- Oct 26, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace: a) Heat Treat Area - On or about 8/17/2022, employees were required by the employer to Northern Safety 9200 N95 respirators while operating the Heat Treat furnace. Training was not provided prior to requiring employees to use a respirator in the workplace. Employer shall ensure each employee can demonstrate knowledge of at least the following: Why the respirator is necessary and how improper fit, usage, or maintenance can compromise the protective effect of the respirator; What the limitations and capabilities of the respirator are; How to use the respirator effectively in emergency situations, including situations in which the respirator malfunctions; How to inspect, put on and remove, use, and check the seals of the respirator; What the procedures are for maintenance and storage of the respirator; How to recognize medical signs and symptoms that may limit or prevent the effective use of respirators; and the general requirements of this section. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1910.242 B
- Issued
- Sep 23, 2022
- Abate by
- Oct 11, 2022
- Penalty
- Initial $4,972 · Current $2,450 Reduced
General-duty citation text
29 CFR 1910.242(b):Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Link Press - On or about 8/17/22, compressed air used to blow out metal shavings from the press had a dead end pressure of > 80 psi. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $2450
- — C (S) $4972
- — Z (S) $4972
More inspections at International Ordnance Technologies INC.
View International Ordnance Technologies INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346154271.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.