Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: AGNERS FRAMING CONSTRUCTION LLC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of AGNERS FRAMING CONSTRUCTION LLC. in 260 WHITETAIL TRAIL CREEKSIDE PRESERVE, JOHNSTOWN, OH 43031 (NAICS 238130). OSHA activity number 346167208.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Agners Framing Construction LLC. — free Get an email when a new federal OSHA severe-injury report for Agners Framing Construction LLC. is published. One employer, no account, unsubscribe in one click.
Site address
260 WHITETAIL TRAIL CREEKSIDE PRESERVE
City
JOHNSTOWN
State
OH
ZIP
43031
Mailing
3390 EAST DESHLER AVENUE, COLUMBUS, OH 43227
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

4 citations on file for this inspection.

1926.20 B01

Repeat Gravity 10 1 instance 5 exposed
Issued
Sep 2, 2022
Abate by
Sep 23, 2022
Penalty
Initial $23,928 · Current $23,928
29 CFR  1926.20(b)(1):The employer did not initiate and maintain accident prevention programs as necessary to comply with this part:  a.  Located at 260 Whitetail Trail, Johnstown, OH 43031: Agners Framing Construction did not provide and enforce an accident prevention program designed to mitigate common construction hazards such as falls and struck-by hazards.  Employees were not protected by training, PPE, or accident avoidance/prevention programs while working at heights and with pneumatic equipment.  Agners Framing Construction LLC., was previously cited for a violation of this Occupational Safety and Health standard 29 CFR 1926.20(b)(1), which was contained in OSHA inspection number 1531517, citation number 2, item number 1 and was affirmed as a final order on July 7, 2021, with respect to a workplace located at 161 Crimson Drive, Newark, OH 43055.  Rojas Construction, was previously cited for a violation of this Occupational Safety and Health standard 29 CFR 1926.20(b)(1), which was contained in OSHA inspection number 1385399, citation number 1, item number 1a and was affirmed as a final order on May 7, 2019, with respect to a workplace located at 6729 North Hamilton Road, building #5, Westerville, OH 43081.
Recent events (1)
  • — Z (R) $23928

1926.102 A01

Repeat Gravity 5 1 instance 2 exposed
Issued
Sep 2, 2022
Abate by
Sep 23, 2022
Penalty
Initial $6,838 · Current $6,838
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles:  a.  Located at 260 Whitetail Trail, Johnstown, OH 43031: Agners Framing Construction did not enforce the use of eye protection for employees exposed to flying particles resulting from the operation of a pneumatic nail gun.  Agners Framing Construction LLC., was previously cited for a violation of this Occupational Safety and Health standard 29 CFR 1926.102(a)(1), which was contained in OSHA inspection number 1531517, citation number 1, item number 1 and was affirmed as a final order on July 7, 2021, with respect to a workplace located at 161 Crimson Drive, Newark, OH 43055.
Recent events (1)
  • — Z (R) $6838

1926.501 B13

Repeat Gravity 10 2 instances 5 exposed
Issued
Sep 2, 2022
Abate by
Sep 23, 2022
Penalty
Initial $23,928 · Current $23,928
29 CFR  1926.501(b)(13):"Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure:  a.  Located at 260 Whitetail Trail, Johnstown, OH 43031: Agners Framing Construction employees working on joists at a height of approximately 10' on a residential construction project were not protected from fall hazards.  b.  Located at 260 Whitetail Trail, Johnstown, OH 43031:  Agners Framing Construction employees working on the first floor and joists of a residential construction project were not protected from fall hazards posed by an unguarded 10' staircase opening between the basement and first floor.  Agners Framing Construction LLC., was previously cited for a violation of this Occupational Safety and Health standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 1531517, citation number 2, item number 3 and was affirmed as a final order on July 7, 2021, with respect to a workplace located at 161 Crimson Drive, Newark, OH 43055.  Rojas Construction was previously cited for a violation of this Occupational Safety and Health standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 1385399, citation number 1, item number 2 and was affirmed as a final order on May 7, 2019, with respect to a workplace located at 6729 North Hamilton Road, building #5, Westerville, OH 43081.
Recent events (1)
  • — Z (R) $23928

1926.503 A01

Repeat Gravity 10 1 instance 5 exposed
Issued
Sep 2, 2022
Abate by
Sep 23, 2022
Penalty
Initial $0 · Current $0
29 CFR  1926.503(a)(1):The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a.  Located at 260 Whitetail Trail, Johnstown, OH 43031:  Agners Framing Construction did not provide a training program for employees exposed to fall hazards to ensure that hazards could be recognized and mitigated, which exposed them to fall hazards ranging from 10' to 20'.  Agners Framing Construction LLC., was previously cited for a violation of this Occupational Safety and Health standard 29 CFR 1926.503(a)(1), which was contained in OSHA inspection number 1531517, citation number 1, item number 3 and was affirmed as a final order on July 7, 2021, with respect to a workplace located at 161 Crimson Drive, Newark, OH 43055.
Recent events (1)
  • — Z (R) $0

View Agners Framing Construction LLC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346167208.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.