Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: STAR ENGINEERING INC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of STAR ENGINEERING INC in 701 MADISON STREET, NEW LEXINGTON, OH 43764 (NAICS 332312). OSHA activity number 346275282.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Star Engineering INC — free Get an email when a new federal OSHA severe-injury report for Star Engineering INC is published. One employer, no account, unsubscribe in one click.
Site address
701 MADISON STREET
City
NEW LEXINGTON
State
OH
ZIP
43764
Mailing
701 MADISON STREET, NEW LEXINGTON, OH 43764
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
35
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 20 exposed
Issued
Dec 1, 2022
Penalty
Initial $5,801 · Current $3,481 Reduced
OSH ACT of 1970 Section (5)(a)(1):The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees.  a. On or before October 12, 2022, and at times prior, located in building four, a safety latch was not functional on the hook of the five-ton underhung crane. The employer did not ensure that the hook had a functional safety latch to secure chain slings in the hook. The condition exposed employees to crushing and struck by hazards.
Recent events (2)
  • — I (S) $3480.6
  • — Z (S) $5801

1910.184 E01

Serious Gravity 5 1 instance 20 exposed
Issued
Dec 1, 2022
Penalty
Initial $7,252 · Current $4,351 Reduced
29 CFR  1910.184(e)(1):Sling identification. Alloy steel chain slings shall have permanently affixed durable identification stating size, grade, rated capacity, and reach.  a. On or before October 12, 2022, the employer did not ensure steel chain slings had a durable identification that included size, grade, rated capacity, and reach.  In Bldg. 1 employees used a 10-ton crane with a three-legged steel chain sling with no identification.   b. On or before October 12, 2022, the employer did not ensure steel chain slings had a durable identification that included size, grade, rated capacity, and reach.  In Bldg. 2 employees used a 10-ton crane with a three-legged steel chain sling with an illegible identification tag.
Recent events (2)
  • — I (S) $4351.2
  • — Z (S) $7252

1910.184 E09 II

Serious Gravity 5 1 instance 20 exposed
Issued
Dec 1, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.184(e)(9)(ii):Slings shall be removed from service if hooks are cracked, have been opened more than 15 percent of the normal throat opening measured at the narrowest point or twisted more than 10 degrees from the plane of the unbent hook.  a. On or before October 12, 2022, the employer did not ensure the hook openings of the steel chain sling were less than 15 percent of the normal throat opening.  In Bldg. 2 employees used a 10-ton crane with a three-legged steel chain sling, where the hook openings were stretched more that 15 percent, thereby exposing employees to struck-by or crushed-by hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.252 B02 III

Serious Gravity 5 1 instance 201 exposed
Issued
Dec 1, 2022
Penalty
Initial $7,252 · Current $4,351 Reduced
29 CFR  1910.252(b)(2)(iii):Protection from arc welding rays. Where the work permits, the welder should be enclosed in an individual booth painted with a finish of low reflectivity such as zinc oxide (an important factor for absorbing ultraviolet radiations) and lamp black, or shall be enclosed with noncombustible screens similarly painted. Booths and screens shall permit circulation of air at floor level. Workers or other persons adjacent to the welding areas shall be protected from the rays by noncombustible or flameproof screens or shields or shall be required to wear appropriate goggles.  a. On or before October 12, 2022, the employer did not ensure employees were protected from the rays from welding activities in the area. An employee was welding without the use of a screen or shield to protect other workers in the area.
Recent events (2)
  • — I (S) $4351.2
  • — Z (S) $7252

View Star Engineering INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346275282.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.