OSHA Inspection: BM CONSTRUCTION GROUP, INC.

Issued

Feb 24, 2023

Abate by

Mar 15, 2023

Penalty

Initial $376 · Current $376

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  BM Construction Group, Inc, failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:  Citation Number                Item Number                        Abatement Date  01                                             01                                              12/20/2022  01                                             02                                              12/20/2022  01                                             03                                              12/20/2022 In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Nov 23, 2022

Abate by

Dec 20, 2022

Penalty

Initial $3,108 · Current $3,108

General-duty citation text

29 CFR 1926.453(b)(2)(v):  A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift:  a)  On or about October 13, 2022, employees were exposed to the hazard of falling while operating a Telescopic Boom Lift S-45 Model without using personal fall protection.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Nov 23, 2022

Abate by

Dec 20, 2022

Penalty

Initial $3,108 · Current $3,108

General-duty citation text

29 CFR 1926.501(b)(1):  Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:  a)  On or about October 13, 2022, employees performing framing work were exposed to fall hazards of approximately 19 feet.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Nov 23, 2022

Abate by

Dec 20, 2022

Penalty

Initial $4,351 · Current $4,351

General-duty citation text

29 CFR 1926.501(b)(4)(i):  Each employee on walking/working surfaces was not protected from falling through holes (including skylights), more than six feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes:  a)  On or about October 13, 2022, employees were exposed to falls of approximately 19 feet while working around unprotected floor openings.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.