Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MB TECH MICRONESIA LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MB TECH MICRONESIA LLC in KAUTZ GLASS, SAIPAN, MP 96950 (NAICS 238140). OSHA activity number 346295769.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch MB Tech Micronesia LLC — free Get an email when a new federal OSHA severe-injury report for MB Tech Micronesia LLC is published. One employer, no account, unsubscribe in one click.
Site address
KAUTZ GLASS
City
SAIPAN
State
MP
ZIP
96950
Mailing
PO BOX 504850, SAIPAN, MP 96950
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
8
Ownership type
A

7 citations on file for this inspection.

1926.304 D

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 5, 2022
Penalty
Initial $4,144 · Current $2,901 Reduced
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe.  Break Area: The Ridged saw used to cut wood for concrete forms and scaffold planks was not guarded. Employees were exposed to amputation hazards.
Recent events (2)
  • — I (S) $2900.8
  • — Z (S) $4144

1926.502 D15

Serious Gravity 5 1 instance 6 exposed
Issued
Dec 5, 2022
Abate by
Dec 22, 2022
Penalty
Initial $3,315 · Current $2,321 Reduced
29 CFR 1926.502(d)(15): Anchorage points used for attachment of personal fall arrest equipment were not independent of any anchorage point being used to support or suspend platforms and capable of supporting at least 5,000 pounds (22.2 kN) per employee:  On the scaffold: The top rail of the scaffold was used as an anchorage point for employees personal fall arrest system. Employees were exposed to fall hazards.
Recent events (2)
  • — I (S) $2320.5
  • — Z (S) $3315

1926.502 D16 III

Serious Gravity 5 1 instance 6 exposed
Issued
Dec 5, 2022
Abate by
Dec 22, 2022
Penalty
Initial $0 · Current $0
29 CFR 1926.502(d)(16)(iii): Personal fall arrest systems, when stopping a fall, were not rigged such that an employee could not free fall more than 6 feet (1.8 m) nor contact any lower level:  On the scaffold: The personal fall arrest system lanyard was attached to the scaffold top rail below the employees feet when standing on the concrete form. Employees were exposed to fall hazards of more than six feet.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.95 A

Repeat 1 instance 1 exposed
Issued
Dec 5, 2022
Abate by
Dec 15, 2022
Penalty
Initial $233 · Current $233
29 CFR 1926.95(a): Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, were not provided, used, and maintained in a sanitary and reliable condition wherever it was necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact:    On the scaffold platform: An employee was not wearing gloves when pouring concrete with a concrete pump into the wall form. Employee were exposed to chemical hazards.  MB Tech Micronesia LLC. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.95(a), which was contained in OSHA inspection number 1301778, citation number 1, item number 1 and was affirmed as a final order on 01 June 2018, with respect to a workplace located at San Vicente Saipan, MP 96950.
Recent events (2)
  • — I (R) $233
  • — Z (R) $233

1926.1052 C01 II

Repeat 1 instance 8 exposed
Issued
Dec 5, 2022
Abate by
Dec 15, 2022
Penalty
Initial $233 · Current $233
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with a stairrail system along each unprotected side or edge:  Wooden Stairs: Employees used stairs with five risers to access the work area that were not protected with a stair rail system along each unprotected side. Employees were exposed to fall hazards.  MB Tech Micronesia LLC. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.1052(c)(1)(ii), which was contained in OSHA inspection number 1301778, citation number 1, item number 3 and was affirmed as a final order on 01 June 2018, with respect to a workplace located at San Vicente Saipan, MP 96950.
Recent events (2)
  • — I (R) $233
  • — Z (R) $233

1926.416 E01

Other-than-serious 1 instance 2 exposed
Issued
Dec 5, 2022
Penalty
Initial $0 · Current $0
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used:  Break Area: The extension cord powering the Ridged saw used to cut wood for concrete forms and scaffold planks was frayed. Employees were exposed to electrical and fire hazards.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1926.451 B01

Other-than-serious 1 instance 6 exposed
Issued
Dec 5, 2022
Abate by
Dec 22, 2022
Penalty
Initial $0 · Current $0
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii)  Tube and coupler scaffold: Employees were pouring concrete from a scaffold that was not fully planked. Employees were exposed to fall hazards.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View MB Tech Micronesia LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346295769.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.