BELTON, MO —
OSHA Inspection: MULTI-FAMILY FRAMING, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MULTI-FAMILY FRAMING, LLC in 301 TOWNE CENTER DRIVE, BELTON, MO 64012 (NAICS 238130). OSHA activity number 346327760.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MULTI-FAMILY FRAMING, LLC
- Site address
- 301 TOWNE CENTER DRIVE
- City
- BELTON
- State
- MO
- ZIP
- 64012
- Mailing
- 11806 DELAVAN AVE, KANSAS CITY, KS 66109
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 3
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.403 B02
- Issued
- Jan 19, 2023
- Abate by
- Feb 14, 2023
- Penalty
- Initial $3,349 · Current $0 Reduced
General-duty citation text
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: Workers were exposed to electrical shock hazards at a worksite at 301 Towne Center Drive in Belton, MO 64012. This was last demonstrated on or about August 22, 2022, when an extension cord was being used by employees to power tools and equipment. The extension cord was plugged into another three-outlet extension cord in series. The use of the cords while plugged into another set of extension cords in series is not in accordance with the listing, labeling, and certification of the extension cords.
Recent events (2)
- — I (S) $0
- — Z (S) $3349
1926.405 G02 IV
- Issued
- Jan 19, 2023
- Abate by
- Feb 14, 2023
- Penalty
- Initial $3,349 · Current $0 Reduced
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: Workers were exposed to electrical shock hazards at a worksite at 301 Towne Center Drive in Belton, MO 64012. This was last demonstrated on or about August 22, 2022, when workers were engaged in farming activities. A flexible cord and cable (extension cord) presented with strain relief exposing the internal wiring and was being used by employees to power tools and equipment.
Recent events (2)
- — I (S) $0
- — Z (S) $3349
1926.501 B13
- Issued
- Jan 19, 2023
- Abate by
- Feb 14, 2023
- Penalty
- Initial $4,688 · Current $0 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net systems, or personal fall arrest system, nor were an employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): Workers were exposed to fall hazards at a worksite at 301 Towne Center Drive in Belton, MO 64012. This was last demonstrated on or about August 22, 2022, when workers were engaged in farming activities. a) Workers framing and applying trusses to building #8 were exposed to fall hazards approximately 10 feet from the eave of the roof to the ground below. No guard rails, safety net system, or personal fall arrest system were utilized to prevent falls. b) Workers framing and applying joists to building #12 were exposed to fall hazards approximately 10 feet from the eave of the roof to the ground below. No guard rails, safety net system, or personal fall arrest system were utilized to prevent falls. c) Workers framing and applying trusses to building #17 were exposed to fall hazards approximately 30 feet from the eave of the roof to the ground below. No guard rails, safety net system, or personal fall arrest system were utilized to prevent falls. d) Workers framing and applying roof decking to building #23 were exposed to fall hazards approximately 30 feet from the eave of the roof to the ground below. No guard rails, safety net system, or personal fall arrest system were utilized to prevent falls.
Recent events (2)
- — I (S) $0
- — Z (S) $4688
More inspections at Multi-Family Framing, LLC
View Multi-Family Framing, LLC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346327760.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.