Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DCI METAL BUILDING, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of DCI METAL BUILDING, INC. in 4147 INDUSTRIAL WAY, OAKWOOD, GA 30502 (NAICS 238120). OSHA activity number 346369010.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch DCI Metal Building, INC. — free Get an email when a new federal OSHA severe-injury report for DCI Metal Building, INC. is published. One employer, no account, unsubscribe in one click.
Site address
4147 INDUSTRIAL WAY
City
OAKWOOD
State
GA
ZIP
30502
Mailing
908 PINE ST, GAINESVILLE, GA 30501
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
15
Ownership type
A

5 citations on file for this inspection.

1926.100 A

Serious Gravity 1 1 instance 1 exposed
Issued
Feb 21, 2023
Abate by
Mar 17, 2023
Penalty
Initial $2,946 · Current $1,473 Reduced
29 CFR  1926.100(a): Employees working in areas where there was a possible danger of head injury from impact or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a) New commercial construction located at 4147 Industrial Way, Oakwood GA 30502, the ground area below the elevated working platform: On or about December 1, 2022, and at times prior, the employer exposed an employee to struck-by hazards, in that the employer did not ensure that proper head protection was used during clean-up operations below the elevated working platform.
Recent events (2)
  • — I (S) $1473
  • — Z (S) $2946

1926.451 C02 V

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 21, 2023
Abate by
Mar 17, 2023
Penalty
Initial $6,875 · Current $3,438 Reduced
29 CFR  1926.451(c)(2)(v): Fork-lifts were used to support scaffold platforms while the entire platform was not attached to the fork and the fork-lift was moved horizontally while the platform was occupied:  a)  New commercial construction located at 4147 Industrial Way, Oakwood GA 30502, work platform attachment: On or about December 1, 2022, and at times prior, the employer exposed employees to fall hazards of 19 feet to the lower ground level, in that the employer did not ensure that the work platform was attached to the forks while the platform was moved in a horizontal and vertical motion to the upper working area while occupied by employees.
Recent events (2)
  • — I (S) $3437.5
  • — Z (S) $6875

1926.451 G01 VII

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 21, 2023
Abate by
Mar 17, 2023
Penalty
Initial $4,911 · Current $2,456 Reduced
29 CFR  1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section.  a)  New commercial construction located at 4147 Industrial Way, Oakwood GA 30502, work platform attachment: On or about December 1, 2022, and at times prior, the employer exposed employees to fall hazards of 19-feet to the lower ground level, in that the employer did not ensure that the guard rails around the manufactured work platform were 42-inches plus or minus 3 inches in height. The guard rails at the time of the inspection measured approximately 36-1/2 inches in height at the top rail.
Recent events (2)
  • — I (S) $2455.5
  • — Z (S) $4911

1910.178 A04

Other-than-serious 1 instance 2 exposed
Issued
Feb 21, 2023
Abate by
Mar 17, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.178(a)(4): Modifications or additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:  a) New commercial construction located at 4147 Industrial Way, Oakwood GA 30502, manufactured work platform attachment: On or about December 2, 2022, and at times prior, the employer exposed employees to fall hazards of approximately 19-feet to the lower ground level, in that the employer did not attain written authorization from the manufacturer (Gradall Model -534D-6) prior to the use of the manufactured basket to elevate employees to the working area.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1926.403 B01

Other-than-serious 3 instances 3 exposed
Issued
Feb 21, 2023
Abate by
Mar 17, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.403(b)(1): Employer did not ensure that electrical equipment is free from recognized hazards that are likely to cause death or serious physical harm to employees:  a) New commercial construction located at 4147 Industrial Way, Oakwood GA 30502, ground area: On or about December 1, 2022, and at times prior, the employer exposed employees to electrical hazards including but not limited to shocks and or burns, in that the employer did not inspect and ensure that all electrical equipment was free from recognized hazards to include but not limited to broken outer jacket material, missing or damaged strain relief and proper usage according to manufactures recommendation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View DCI Metal Building, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346369010.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.