GLOVERSVILLE, NY —
OSHA Inspection: LIPPERT COMPONENTS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of LIPPERT COMPONENTS, INC. in 93 SOUTH BOULEVARD, GLOVERSVILLE, NY 12078 (NAICS 332321). OSHA activity number 346377724.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LIPPERT COMPONENTS, INC.
- Site address
- 93 SOUTH BOULEVARD
- City
- GLOVERSVILLE
- State
- NY
- ZIP
- 12078
- Mailing
- 93 SOUTH BOULEVARD, GLOVERSVILLE, NY 12078
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332321
- Employees
- 144
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.132 F01 I
- Issued
- May 24, 2023
- Abate by
- May 31, 2023
- Penalty
- Initial $15,625 · Current $9,375 Reduced
General-duty citation text
29 CFR 1910.132(f)(1)(i): The employer did not provide training to each employee who is required by this section to use PPE on knowing when PPE is necessary: a) Production Machine Shop Weld Sport Area - On or prior to November 21, 2022, an employee was exposed to rotating parts when operating a Bridgeport Milling Machine (Serial No. J-102845) while wearing gloves. Employees were not trained on when it was necessary to wear gloves. b) Production Machine Shop Doors Area - On or about December 7, 2022, an employee was exposed to rotating parts when operating a Bridgeport Milling Machine (J271052)while wearing gloves. Employees were not trained on when it was necessary to wear gloves.
Recent events (2)
- — I (S) $9375
- — Z (S) $15625
1910.133 A02
- Issued
- May 24, 2023
- Abate by
- May 31, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.133(a)(2): The employer did not ensure that each affected employee used eye protection that provided side protection when there was a hazard from flying objects. a) Production Machine Shop Weld Sport Area - On or prior to November 21, 2022, an employee was exposed to flying particles when operating a Bridgeport Milling Machine (Serial No. J-102845) due to wearing regular glasses for eye protection without side shields.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.133 A03
- Issued
- May 24, 2023
- Abate by
- May 31, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.133(a)(3):The employer did not provide protective eyewear for employees who required prescription glasses. a) Production Machine Shop Weld Sport Area - On or prior to November 21, 2022, an employee was exposed to flying particles when operating a Bridgeport Milling Machine (Serial No. J-102845) due to wearing regular glasses for eye protection without side shields. The chip guard was also not used.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- May 24, 2023
- Abate by
- May 31, 2023
- Penalty
- Initial $15,625 · Current $9,375 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Production Machine Shop Weld Sport Area - On or prior to November 21, 2022, an employee was exposed to rotating parts when operating a Bridgeport Milling Machine (Serial No. J-102845) without the guard in place. b) Production Machine Shop Doors Area - On or about December 7, 2022, an employee was exposed to rotating parts when operating a Bridgeport Milling Machine (J271052) without the guard in place. c) Production Machine Shop Weld Sport Area - On or about December 6, 2022, an employee was exposed to rotating parts when operating a Bridgeport Milling Machine (Serial No. J-102845) without the guard in place.
Recent events (2)
- — I (S) $9375
- — Z (S) $15625
More inspections at Lippert Components, INC.
View Lippert Components, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332321)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346377724.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.