BUDD LAKE, NJ —
OSHA Inspection: FRATELLI BERETTA U.S.A. INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of FRATELLI BERETTA U.S.A. INC. in 700 INTERNATIONAL DRIVE, BUDD LAKE, NJ 07828 (NAICS 424470). OSHA activity number 346380850.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FRATELLI BERETTA U.S.A. INC.
- Site address
- 700 INTERNATIONAL DRIVE
- City
- BUDD LAKE
- State
- NJ
- ZIP
- 07828
- Mailing
- 750 CLARK DR., BUDD LAKE, NJ 07828
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424470
- Employees
- 100
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- May 24, 2023
- Abate by
- Jun 22, 2023
- Penalty
- Initial $12,031 · Current $12,031
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about: November 22, 2022 and continuing Location: 700 International Drive, Budd Lake, NJ a) The employer did not ensure that specific Lockout/Tagout procedures were developed, provided, and used for clearing equipment jams for employees performing servicing on equipment that included, but was not limited to an INOX Meccania PIC 99B Automatic Stuffing Machine. Employee engaged unjamming machine suffered amputation to fingers due to machine not being locked out.
Recent events (1)
- — Z (S) $12031
1910.147 C06 I
- Issued
- May 24, 2023
- Abate by
- Jun 22, 2023
- Penalty
- Initial $12,031 · Current $12,031
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: On or about: December 8, 2022 Location: 700 International Drive, Budd Lake, NJ a) The employer did not ensure that periodic inspections of the Hazardous Energy Control program were completed at least annually. Employees engaged in the service and repair of equipment that included, but not limited to, an INOX Meccania PIC 99B Automatic Stuffing Machine were not observed and evaluated on use and effectiveness of LOTO procedures.
Recent events (1)
- — Z (S) $12031
1910.147 C07 I A
- Issued
- May 24, 2023
- Abate by
- Jun 22, 2023
- Penalty
- Initial $12,031 · Current $12,031
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolate: On or about: December 8, 2022 Location: 700 International Drive, Budd Lake, NJ a) The employer did not ensure that authorized employees received hazardous energy control training. Employee who performed maintenance and servicing on equipment that included, but was not limited to, an INOX Meccania PIC 99B Automatic Stuffing Machine were not provided Lockout/Tagout training that included methods and means needed to isolate electrical and mechanical energy.
Recent events (1)
- — Z (S) $12031
1910.147 C07 I B
- Issued
- May 24, 2023
- Abate by
- Jun 22, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: On or about: December 8, 2022 Location: 700 International Drive, Budd Lake, NJ a) The employer did not ensure that affected employees received hazardous energy control training. Employees performed servicing and maintenance on equipment that included, but was not limited to, an INOX Meccania PIC 99B Automatic Stuffing Machine and were not provided Lockout/Tagout training that included methods and means needed to isolate electrical and mechanical energy.
Recent events (1)
- — Z (S) $0
More inspections at Fratelli Beretta U.S.A. INC.
View Fratelli Beretta U.S.A. INC.'s full OSHA safety record →
More inspections in this industry (NAICS 424470)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346380850.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.