NEWARK, NJ —
OSHA Inspection: STIRRUP METAL PRODUCTS CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of STIRRUP METAL PRODUCTS CORPORATION in 215 EMMET ST # E, NEWARK, NJ 07114 (NAICS 332999). OSHA activity number 346405608.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STIRRUP METAL PRODUCTS CORPORATION
- Site address
- 215 EMMET ST # E
- City
- NEWARK
- State
- NJ
- ZIP
- 07114
- Mailing
- 215 EMMET ST #E, NEWARK, NJ 07114
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 48
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.134 C01
- Issued
- Apr 5, 2023
- Abate by
- May 18, 2023
- Penalty
- Initial $6,250 · Current $3,750 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): The employer did not establish and implement a written respiratory protection program with worksite-specific procedures. A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: a) 215 Emmet St. #E, Newark, NJ 07114 The employer did not establish and implement a written respiratory protection program with worksite-specific procedures for employees that are required to wear N95 respirators while spray painting metal in spray booths. Violation noted on or about 01/04/2023.
Recent events (2)
- — I (S) $3750
- — Z (S) $6250
1910.134 E01
- Issued
- Apr 5, 2023
- Abate by
- May 18, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) 215 Emmet St. #E, Newark, NJ 07114 The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was required to use the respirator in the workplace for employees that are required to wear N95 respirators while spray painting metal in spray booths. Violation noted on or about 01/04/2023.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 F02
- Issued
- Apr 5, 2023
- Abate by
- May 18, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): The employer did not ensure that an employee using a tight-fitting respirator is fit tested prior to initial use, whenever a different respirator facepiece (size, style, make or model) is used, and at least annually thereafter: a) 215 Emmet St. #E, Newark, NJ 07114 The employer did not provide a fit test for employees required to use a tight-fitting facepiece respirator while spray painting metal in spray booths. Violation noted on or about 01/04/2023.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K01
- Issued
- Apr 5, 2023
- Abate by
- May 18, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(1): 29 CFR 1910.134(k)(1): The employer did not provide effective training that covered the required elements in 1910.134(k)(1)(i) through 1910.134(k)(1)(vii): a) 215 Emmet St. #E, Newark, NJ 07114 The employer did not provide effective training to employees who are required to use respirators for employees that are required to wear N95 respirators while spray painting metal in spray booths. Violation noted on or about 01/04/2023.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Stirrup Metal Products Corporation
View Stirrup Metal Products Corporation's full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346405608.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.