TROY, AL —
OSHA Inspection: REX LUMBER, TROY, LLC
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of REX LUMBER, TROY, LLC in 1946 COUNTY ROAD 7714, TROY, AL 36081 (NAICS 321113). OSHA activity number 346405905.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- REX LUMBER, TROY, LLC
- Site address
- 1946 COUNTY ROAD 7714
- City
- TROY
- State
- AL
- ZIP
- 36081
- Mailing
- P. O. BOX 7, GRACEVILLE, FL 32440
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 180
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C06 I
- Issued
- Jun 12, 2023
- Abate by
- Aug 19, 2024
- Penalty
- Initial $14,063 · Current $14,063
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Optimized Sharp Chain Line: On or about December 21, 2022, the employer exposed employees to crushed-by hazards in that the employer did not conduct a periodic inspection of the 3155 Primary Profiling Module energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed.
Recent events (3)
- — J (O) $14063
- — C (S) $14063
- — Z (S) $14063
1910.147 C07 I A
- Issued
- Jun 12, 2023
- Abate by
- Aug 19, 2024
- Penalty
- Initial $14,063 · Current $14,063
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: a) Optimized Sharp Chain Line: On or about December 21, 2022, the employer exposed employees to crushed-by hazards in that the employer did not train employees in the recognition of the types of energy associated with residual pressure in hydraulic accumulators and the means necessary for energy isolation and control of hydraulic energy to prevent the unexpected movement of modules when servicing and maintaining the equipment.
Recent events (3)
- — J (O) $14063
- — C (S) $14063
- — Z (S) $14063
1910.147 C04 II B
- Issued
- Jun 12, 2023
- Abate by
- Aug 19, 2024
- Penalty
- Initial $156,259 · Current $81,567 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: a) 3155 Primary Profiling Module: On or about December 21, 2022, the employer exposed employees to crushed-by hazards in that the employer failed to ensure the lockout/tagout procedure for the equipment with revision date 4/7/2020 clearly identified all the specific steps to be followed by employees to isolate and dissipate all the hydraulic energy to prevent unexpected module movement when employees were engaged in servicing and maintenance activities.
Recent events (3)
- — J (R) $81566.5
- — C (W) $156259
- — Z (W) $156259
1910.147 D03
- Issued
- Jun 12, 2023
- Abate by
- Aug 19, 2024
- Penalty
- Initial $0 · Current $20,000
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): a) 3155 Primary Profiling Module: On or about December 21, 2022, the employer exposed employees to crushed-by hazards in that the employer failed to ensure the hydraulic energy was isolated by opening the manual hydraulic dump valve to prevent unexpected module movement when employees were engaged in servicing and maintenance activities. As a result, the applicable energy control elements, LOTO device application [(d)(4)], stored energy [(d)(5)], and verification of isolation [(d)(6)], were not implemented to safeguard employees from the machine servicing hazards.
Recent events (3)
- — J (S) $20000
- — C (W) $0
- — Z (W) $0
More inspections at REX Lumber, Troy, LLC
View REX Lumber, Troy, LLC's full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346405905.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.