Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: C & T CUSTOM FABRICATION, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of C & T CUSTOM FABRICATION, INC. in 345 BASHER DRIVE, BERTHOUD, CO 80513 (NAICS 332999). OSHA activity number 346414386.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch C & T Custom Fabrication, INC. — free Get an email when a new federal OSHA severe-injury report for C & T Custom Fabrication, INC. is published. One employer, no account, unsubscribe in one click.
Site address
345 BASHER DRIVE
City
BERTHOUD
State
CO
ZIP
80513
Mailing
345 BASHER DRIVE, BERTHOUD, CO 80513
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
15
Ownership type
A

5 citations on file for this inspection.

1910.178 A06

Other-than-serious Gravity 1 2 instances 15 exposed
Issued
Jun 2, 2023
Abate by
Jul 7, 2023
Penalty
Initial $2,678 · Current $2,000 Reduced
29 CFR  1910.178(a)(6): The employer did not ensure that all nameplates or markings were maintained in a legible condition:  a) On or about 1/3/2023, the employer did not ensure that the information plates  on the Mitsubishi forklift were maintained in a clear and legible condition. Without knowing the capacity of the forklift, employees were exposed to struck-by hazards.  b) On or about 1/3/2023, the employer did not ensure that the information plates on the Yale forklift were maintained in a clear and legible condition. Without knowing the capacity of the forklift, employees were exposed to struck-by hazards
Recent events (2)
  • — I (O) $2000
  • — Z (S) $2678

1910.178 L01 I

Other-than-serious Gravity 1 1 instance 15 exposed
Issued
Jun 2, 2023
Abate by
Jul 7, 2023
Penalty
Initial $2,678 · Current $2,000 Reduced
29 CFR  1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  a) On or about 1/3/2023, and at times prior, the employer did not ensure that all operators of powered industrial vehicles were competent by completing specific training and evaluation. This conditions exposed employees to crushing and struck-by hazards.
Recent events (2)
  • — I (O) $2000
  • — Z (S) $2678

1910.178 L06

Serious Gravity 1 1 instance 15 exposed
Issued
Jun 2, 2023
Abate by
Jul 7, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  a) On or about 1/3/2023, and at times prior, the employer did not ensure that all operators of powered industrial vehicles were certified by completing specific training and evaluation.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.215 A01

Serious Gravity 5 1 instance 15 exposed
Issued
Jun 2, 2023
Abate by
Jul 7, 2023
Penalty
Initial $3,572 · Current $2,000 Reduced
29 CFR  1910.215(a)(1): Abrasive wheel(s) used on grinding machinery were not used with safety guard(s):  a) On or about 1/3/2023, the employer did not ensure that the abrasive wheel on the Dayton 8-inch bench grinder was guarded. Employees who use the grinder are exposed to struck-by hazards.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $3572

1904.4 A

Other-than-serious 1 instance 15 exposed
Issued
Jun 2, 2023
Abate by
Jul 7, 2023
Penalty
Initial $1,000 · Current $0 Reduced
29 CFR  1904.4(a): The employer did not keep records -OSHA 300 form, Log of Work Related Injuries and Illnesses; 300-A form, Summary or Work-Related Injuries and Illnesses; and 301 form, Injury and Illness Incident Report:   a) On or about 1/3/2023, and at times prior,  the employer did not maintain OSHA 300 logs for recordable injuries and illnesses.
Recent events (2)
  • — I (O) $0
  • — Z (O) $1000

View C & T Custom Fabrication, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346414386.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.