MOTT, ND —
OSHA Inspection: K & K CONSTRUCTION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of K & K CONSTRUCTION in 800 HIGHWAY 21, MOTT, ND 58646 (NAICS 332999). OSHA activity number 346444029.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- K & K CONSTRUCTION
- Site address
- 800 HIGHWAY 21
- City
- MOTT
- State
- ND
- ZIP
- 58646
- Mailing
- 1202 7TH AVE NE, WEST FARGO, ND 58078
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 8
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.212 A03 II
- Issued
- Feb 16, 2023
- Abate by
- Apr 5, 2023
- Penalty
- Initial $10,938 · Current $7,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii):Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) On January 18, 2023 and times prior, at or near Highway 21 and 8 in Mott, ND the employer did not ensure the point of operation on the Vertical bandsaw was properly guarded to prevent employees from having any part of their body in the danger zone during machine operations. (b) On January 18, 2023 and times prior, at or near Highway 21 and 8 in Mott, ND the employer did not ensure the point of operation on the Horizontal bandsaw was properly guarded to prevent employees from having any part of their body in the danger zone during machine operations. (c) On January 18, 2023 and times prior, at or near Highway 21 and 8 in Mott, ND the employer did not ensure the point of operation on the Hydro Tool Company Shears was properly guarded to prevent employees from having any part of their body in the danger zone during machine operations.
Recent events (2)
- — I (S) $7000
- — Z (S) $10938
1910.215 A04
- Issued
- Feb 16, 2023
- Abate by
- Feb 23, 2023
- Penalty
- Initial $6,250 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(a)(4):Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: On January 18, 2023 and times prior, at or near Highway 21 and 8 in Mott, ND, the work rest on the Jet bench grinder was kept adjusted closely to the wheel with a maximum opening of one-eighth inch.
Recent events (2)
- — I (O) $0
- — Z (S) $6250
1910.215 B09
- Issued
- Feb 16, 2023
- Abate by
- Feb 23, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9):The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: On January 18, 2023 and times prior, at or near Highway 21 and 8 in Mott, ND Tongue Safety guards on the Jet bench grinder was not adjusted closely to the wheel with a maximum opening of one-fourth inch.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.243 C01
- Issued
- Feb 16, 2023
- Abate by
- Feb 27, 2023
- Penalty
- Initial $6,250 · Current $4,719 Reduced
General-duty citation text
29 CFR 1910.243(c)(1):Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4)(a) (a) On January 18, 2023 and times prior, at or near Highway 21 and 8 in Mott, ND, for the employee exposed to injury from flying debris where an angle grinder did not have the required guard attached.
Recent events (2)
- — I (S) $4719
- — Z (S) $6250
1910.253 B02 II
- Issued
- Feb 16, 2023
- Abate by
- Feb 23, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.253(b)(2)(ii):Assigned storage spaces for cylinders was not located away from elevators, stairs, or gangways where cylinders could not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons: On January 18, 2023 and times prior, at or near Highway 21 and 8 in Mott, ND empty oxygen and acetylene cylinders were not stored in an area where they couldn't be knocked over or damaged by passing or falling objects
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.334 A02 II
- Issued
- Feb 16, 2023
- Abate by
- Feb 23, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(ii):There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service: On January 18, 2023 and times prior, at or near Highway 21 and 8 in Mott, ND for the employee exposed to electrical shock hazards where multiple plug and cord sets were damaged was not taken out of service.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at K & K Construction
View K & K Construction's full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in ND
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346444029.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.