OSHA Inspection: ANGEL OF THE WINDS CASINO RESORT

Issued

Mar 13, 2023

Abate by

Apr 6, 2023

Penalty

Initial $5,692 · Current $3,415 Reduced

General-duty citation text

29 CFR 1910.36(g)(2): An exit access was not at least 28 inches (71.1 cm) wide at all points:  a) The Grind Coffee Caf�, where the configuration of the built-in counter and ice cream freezer reduced the exit access width to 26 inches.

Issued

Mar 13, 2023

Abate by

Apr 6, 2023

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.37(a)(3): Exit routes were not kept free and unobstructed:  a) Facility, where items were stored in the exit route.  1. W?l�?ali Hall, the banquet hall exit route was used to store tables, chairs stage platforms, wood pallets, and a pallet jack.  2. Katie's Kitchen, the kitchen's exit route was used to hold two large refrigerators on wheels, mop equipment, and a bucket.

Issued

Mar 13, 2023

Abate by

Apr 6, 2023

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit":  a) Facility, where the designated emergency exit doors not equipped with exit signs included:  1. EVS Warehouse, door that opened into the exit access hallway.  2. Boiler Room Office, door that opened into the exit access.  3. Chiller Room, exit discharge door.  4. Jade 210 Kitchen, door that opened into the exit access stairwell.

Issued

Mar 13, 2023

Abate by

Apr 6, 2023

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.37(b)(5): Each doorway or passage along an exit access that could be mistaken for an exit was not marked "Not an Exit" or similar designation, or identified by a sign indicating its actual use (e.g. closet):  a) Hotel Laundry Room, where doors to the Dryer Maintenance Room and Boiler room that led to dead-ends did not have signs.

Issued

Mar 13, 2023

Abate by

Apr 6, 2023

Penalty

Initial $5,692 · Current $3,415 Reduced

General-duty citation text

29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  a) Slots Repair Management Office, where two relocatable power taps were daisy chained and used to supply power to the Frigidaire refrigerator and the microwave.

Issued

Mar 13, 2023

Abate by

Apr 6, 2023

Penalty

Initial $5,692 · Current $3,415 Reduced

General-duty citation text

29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:  a) Facility, where outlets not equipped with face plates included, but were not limited to:  1. Strikerz Bowling Alley Maintenance Shop, the outlet used to supply power to the extension cord that energized the Avanti refrigerator and the Bella air fryer (item corrected).  2. Katie's Kitchen Hallway, three outlets not equipped with covers used to supply power to the cigarette vending machine and two portable fans.  3. Employee Break Room Hallway, an outlet that was available for use.

Issued

Mar 13, 2023

Abate by

Apr 6, 2023

Penalty

Initial $5,692 · Current $3,415 Reduced

General-duty citation text

29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  a) Facility, where flexible cords and cables were used as a substitute for fixed wiring, included:    1. Strikerz Bowling Alley Maintenance Shop, where an orange and black extension cord was used to supply power to the Avanti refrigerator and Bella air fryer located in the shop.   2. Environmental Specialist (EVS) Warehouse cubicle, where a yellow extension cord was used to supply power to a microwave (item corrected).  3. Employee Break Room Hallway, where an orange extension cord was used to supply power to the commercial refrigerator.  4. Employee Break Room Area, where a yellow extension cord was used to supply power to the commercial refrigerator.

Issued

Mar 13, 2023

Abate by

Apr 6, 2023

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:   a) Maintenance Department, where the employer utilized the lockout tagout program for safe electrical work practices, no written procedures were developed for preventative maintenance and repair of the HVAC system.