TAMPA, FL —
OSHA Inspection: CDS MANUFACTURING, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of CDS MANUFACTURING, INC. in 5251 W TYSON AVE, TAMPA, FL 33611 (NAICS 238110). OSHA activity number 346554595.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CDS MANUFACTURING, INC.
- Site address
- 5251 W TYSON AVE
- City
- TAMPA
- State
- FL
- ZIP
- 33611
- Mailing
- 17598 BLUE STAR HWY, QUINCY, FL 32351
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238110
- Employees
- 100
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 E01
- Issued
- Jun 23, 2023
- Abate by
- Aug 10, 2023
- Penalty
- Initial $8,438 · Current $5,063 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) On or about March 9, 2023 at the yard, the employer did not ensure that employees required to wear tight-fitting respirators were provided a medical evaluation to determine their ability to use respirators in the workplace. Employees involved in grinding operations were provided and required to wear 3M - Half face Respirator.
Recent events (2)
- — I (S) $5062.8
- — Z (S) $8438
1910.134 F02
- Issued
- Jun 23, 2023
- Abate by
- Aug 10, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator a) On or about March 9, 2023 at the yard, the employer did not ensure that employees required to wear tight-fitting respirator were fit tested prior to initial use of the respirator in the workplace.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.300 B01
- Issued
- Jun 23, 2023
- Abate by
- Jul 20, 2023
- Penalty
- Initial $5,625 · Current $3,375 Reduced
General-duty citation text
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use:(a) a) On or about March 9, 2023, at the yard, the Dewalt Angle Grinder was not guarded, exposing employees to amputation hazards.
Recent events (2)
- — I (S) $3375
- — Z (S) $5625
1926.350 A01
- Issued
- Jun 23, 2023
- Abate by
- Jul 20, 2023
- Penalty
- Initial $8,438 · Current $5,063 Reduced
General-duty citation text
29 CFR 1926.350(a)(1):Valve protection cap(s) were not in place and secured on compressed gas cylinder(s): a) On or about March 9, 2023, at the worksite, compressed gas cylinder(s) located near the trailer did not have valve protection caps, exposing employees to a struck-by hazard in the event of sudden release and rupture.
Recent events (2)
- — I (S) $5062.8
- — Z (S) $8438
1926.350 A04
- Issued
- Jun 23, 2023
- Abate by
- Jul 20, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.350(a)(4): Compressed gas cylinder(s) being transported by powered vehicles were not secured in a vertical position: a) On or about March 9, 2023, at the worksite, a compressed gas cylinder was being transported by a bobcat in a horizontal position without being secured, exposing employees to a fire hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1153 I01
- Issued
- Jun 23, 2023
- Abate by
- Jul 20, 2023
- Penalty
- Initial $5,625 · Current $3,375 Reduced
General-duty citation text
29 CFR 1926.1153(i)(1):The employer did not include respirable crystalline silica in the program established to comply with the hazard communication standard (HCS) (29 CFR 1910.1200): a.) On or about March 9, 2023, at the yard located at 5251 W Tyson Ave, Tampa, FL 33611 , the employer did not include respirable crystalline silica in the hazard communication program, exposing employees to silica related health hazards.
Recent events (2)
- — I (S) $3375
- — Z (S) $5625
More inspections at CDS Manufacturing, INC.
View CDS Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238110)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346554595.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.