Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MH CARPENTRY, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MH CARPENTRY, INC. in 17062 FOXTAIL DR., ORLAND PARK, IL 60467 (NAICS 238130). OSHA activity number 346602642.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch MH Carpentry, INC. — free Get an email when a new federal OSHA severe-injury report for MH Carpentry, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
MH CARPENTRY, INC.
Site address
17062 FOXTAIL DR.
City
ORLAND PARK
State
IL
ZIP
60467
Mailing
2311 ARROW STREET, CARPENTERSVILLE, IL 60110
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
7
Ownership type
A

4 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 1 exposed
Issued
Jul 18, 2023
Abate by
Aug 21, 2023
Penalty
Initial $413 · Current $413
29 CFR  1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section.   a.  On or about March 30, 2023, the employer did not certify to OSHA within 10 days after the abatement date that each of the following cited violations issued had been corrected:  Citation Number          Item Number           Abatement Date 0200105/22/20223
Recent events (1)
  • — Z (O) $413

1926.451 B02

Serious Gravity 1 1 instance 2 exposed
Issued
Apr 26, 2023
Penalty
Initial $2,210 · Current $2,210
29 CFR  1926.451(b)(2): Scaffold platforms and walkways were not at least 18 inches wide:  a.  On or about March 30, 2023, at the above addressed jobsite, employees performing carpentry operations from carpenter scaffolds were exposed to fall hazards due to the scaffold platforms not being at least 18 inches wide.
Recent events (1)
  • — Z (S) $2210

1926.501 B13

Repeat Gravity 5 1 instance 1 exposed
Issued
Apr 26, 2023
Penalty
Initial $22,100 · Current $22,100
29 CFR  1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):  a.  On or about March 30, 2023, at the above addressed jobsite, an employee performing residential carpentry operations, eleven (11) feet eight (8) inches above ground, was not utilizing a complete personal fall arrest system, thereby exposing the employee to fall hazards.  MH Carpentry, Inc. was previously cited for a violation of this occupational safety and health standard, 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 1460596, citation number 2, item number 1, and was affirmed as a final order on April 2, 2020, with respect to a workplace located at 420 Woodchase Ln, Lot/Homesite 10, Vernon Hills, Illinois, 60061.  MH Carpentry, Inc. was previously cited for a violation of this occupational safety and health standard, 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 1393966, citation number 1, item number 1, and was affirmed as a final order on July 29, 2019, with respect to a workplace located at 444 Woodland Chase, Vernon Hills, Illinois, 60061.
Recent events (1)
  • — Z (R) $22100

1926.503 A01

Repeat Gravity 5 1 instance 1 exposed
Issued
Apr 26, 2023
Abate by
May 22, 2023
Penalty
Initial $5,893 · Current $5,893
29 CFR  1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a.  On or about March 30, 2023, at the above addressed jobsite, an employee performing residential carpentry operations was not provided training on how to minimize fall hazards, thereby exposing the employee to fall hazards.  MH Carpentry, Inc. was previously cited for a violation of this occupational safety and health standard, 29 CFR 1926.503(a)(1), which was contained in OSHA inspection number 1460596, citation number 1, item number 3, and was affirmed as a final order on April 2, 2020, with respect to a workplace located at 420 Woodchase Ln, Lot/Homesite 10, Vernon Hills, Illinois, 60061.
Recent events (1)
  • — Z (R) $5893

View MH Carpentry, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346602642.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.