FORT SCOTT, KS —
OSHA Inspection: EXTRUSIONS INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of EXTRUSIONS INC in 2401 S MAIN ST, FORT SCOTT, KS 66701 (NAICS 331318). OSHA activity number 346662869.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EXTRUSIONS INC
- Site address
- 2401 S MAIN ST
- City
- FORT SCOTT
- State
- KS
- ZIP
- 66701
- Mailing
- 2401 S MAIN ST, FORT SCOTT, KS 66701
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331318
- Employees
- 48
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C07 I B
- Issued
- Jul 14, 2023
- Abate by
- Aug 9, 2023
- Penalty
- Initial $14,063 · Current $8,438 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: In the CNC Area, employee(s) engaged in automated CNC machine activities were not instructed in the purpose and use of the energy control procedure or provided any training on the topic of lockout / tagout before using the automated CNC machine. The automated CNC machine is as follows: 1. Make: Emmegi; Model: Phantomatic TS Star; Designation: Centrto Di Lavoro; Serial #: C124615.
Recent events (2)
- — I (S) $8437.8
- — Z (S) $14063
1910.147 D04 I
- Issued
- Jul 14, 2023
- Abate by
- Aug 9, 2023
- Penalty
- Initial $14,063 · Current $8,438 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: In the CNC Area, Affected employee(s) are exposed to amputation and laceration hazards in that they are conducting improper lockout / tagout activities when they are not Authorized employee(s). Employee(s) isolate power at an electrical disconnect for an automated CNC machine without placing a lock or tag on the machine. Employee(s) then engage in maintenance work to clean the automated CNC machine. The automated CNC machine is as follows: 1. Make: Emmegi; Model: Phantomatic TS Star; Designation: Centrto Di Lavoro; Serial #: C124615.
Recent events (2)
- — I (S) $8437.8
- — Z (S) $14063
1910.147 C04 I
- Issued
- Jul 14, 2023
- Abate by
- Aug 9, 2023
- Penalty
- Initial $1,128 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: In the CNC Area, employee(s) engaged in daily machine shop activities were not provided with machine specific lockout / tagout procedures for an automated CNC machine the employer had for over a year, which could be used for the control of potentially hazardous energy. The automated CNC machine is as follows: 1. Make: Emmegi; Model: Phantomatic TS Star; Designation: Centrto Di Lavoro; Serial #: C124615.
Recent events (2)
- — I (O) $0
- — Z (O) $1128
1910.147 C06 I
- Issued
- Jul 14, 2023
- Abate by
- Aug 9, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: In the CNC Area, employee(s) engaged in automated CNC machine activities were exposed to struck by, caught in, amputation, and laceration hazards in that the employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard are being followed, as the automated CNC machine had no machine specific energy control procedures for a periodic inspection to occur. The automated CNC machine is as follows: 1. Make: Emmegi; Model: Phantomatic TS Star; Designation: Centrto Di Lavoro; Serial #: C124615.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.212 A03 II
- Issued
- Jul 14, 2023
- Abate by
- Aug 9, 2023
- Penalty
- Initial $14,063 · Current $7,032 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii):Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): In the CNC Area, employee(s) engaged in machine shop activities were exposed to amputation and laceration hazards in that a Bridgeport drill press did not have a machine guard at the point of operation. The drill press is as follows: 1. Make: Bridgeport; Model: Jet 15; Color: Painted Green; Serial #: 6053; Identifying #: 57; Serial #: Unidentifiable.
Recent events (2)
- — I (S) $7031.5
- — Z (S) $14063
1910.132 D02
- Issued
- Jul 14, 2023
- Abate by
- Aug 9, 2023
- Penalty
- Initial $1,128 · Current $0 Reduced
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: At the Main Facility, employee(s) engaged in machine shop and manufacturing activities' were exposed to struck by, caught in, laceration, and amputation hazards in that the employer did not verify through a written certification that the required workplace hazard assessment had been performed.
Recent events (2)
- — I (O) $0
- — Z (O) $1128
More inspections at Extrusions INC
View Extrusions INC's full OSHA safety record →
More inspections in this industry (NAICS 331318)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346662869.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.