ROUND ROCK, TX —
OSHA Inspection: CREATIVE CUSTOM CABINETS INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CREATIVE CUSTOM CABINETS INC. in 1500 WEST INDUSTRIAL BLVD., ROUND ROCK, TX 78681 (NAICS 337110). OSHA activity number 346670821.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Creative Custom Cabinets INC. — free
Get an email when a new federal OSHA severe-injury report for Creative Custom Cabinets INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- CREATIVE CUSTOM CABINETS INC.
- Site address
- 1500 WEST INDUSTRIAL BLVD.
- City
- ROUND ROCK
- State
- TX
- ZIP
- 78681
- Mailing
- 1500 WEST INDUSTRIAL BLVD., ROUND ROCK, TX 78681
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 50
- Ownership type
- A
Citations
16 citations on file for this inspection.
1910.22 A01
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $4,687 · Current $2,344 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): The employer did not ensure that all places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition. On or about April 28, 2023, and at times prior thereto, multiple electrical cords and air hoses were running across walking-working surfaces, exposing employees to tripping hazards.
Recent events (2)
- — I (O) $2343.5
- — Z (S) $4687
1910.107 G02
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $6,250 · Current $0 Reduced
General-duty citation text
29 CFR 1910.107(g)(2): Scrapers, spuds, or other such tools used for cleaning purposes were not of non-sparking material. On or about April 28, 2023, and at times prior thereto, employees were cleaning flammable chemicals off of concrete floor(s) and metal wall(s) of paint booth(s) with metal scrapers, exposing employees to the hazard of fire or conflagration.
Recent events (2)
- — I (S) $0
- — Z (S) $6250
1910.107 G03
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $6,250 · Current $3,125 Reduced
General-duty citation text
29 CFR 1910.107(g)(3): Rags or waste impregnated with finishing material were not deposited in approved metal waste cans immediately after use. On or about April 28, 2023, and at times prior thereto, used rags, Tyvek suits and other impregnated debris from spray finishing were discarded into plastic waste cans, exposing employees to the hazard of a fire.
Recent events (2)
- — I (S) $3125
- — Z (S) $6250
1910.134 E01
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $6,250 · Current $3,125 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace. On or about April 28, 2023, and at times prior thereto, employees were spray finishing while wearing a tight-fitting respirator without an approved medical evaluation, exposing employees to the hazard of an undue physiological burden.
Recent events (2)
- — I (O) $3125
- — Z (S) $6250
1910.134 F02
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator. On or about April 28, 2023, and at times prior thereto, employees were spray finishing while wearing a respirator without being fit tested prior to use, exposing employees to the hazard of inhaling hazardous chemicals.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.151 C
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $6,250 · Current $3,125 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use. On or about April 28, 2023, and times prior thereto, employees were working with corrosive chemicals without eye flushing equipment being provided, exposing employees to the hazard of various eye injuries.
Recent events (2)
- — I (S) $3125
- — Z (S) $6250
1910.157 E02
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $4,687 · Current $2,344 Reduced
General-duty citation text
29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly. On or about April 28, 2023, and at times prior thereto, the employer did not inspect the fire extinguishers monthly throughout the facility, exposing the employees to various fire hazards.
Recent events (2)
- — I (O) $2343.5
- — Z (S) $4687
1910.157 G01
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(g)(1): An educational program was not provided for all employees to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting. On or about April 28, 2023, and at times prior thereto, employees were permitted to use fire extinguishers without proper training, exposing employees to various fire hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L01 I
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $6,250 · Current $3,125 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l). On or about April 28, 2023, and at times prior thereto, employees were operating powered industrial trucks without the employer providing training to safely operate the equipment, exposing employees to hazards such as but not limited to being struck-by a powered industrial truck.
Recent events (2)
- — I (O) $3125
- — Z (S) $6250
1910.212 A01
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $9,376 · Current $4,688 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. On or about April 28, 2023, and at times prior thereto, employees were operating a Taylor Cameron Automation Door Clamp Machine without the use of a guard, exposing employees to the hazard of being struck-by rotating parts.
Recent events (2)
- — I (S) $4688
- — Z (S) $9376
1910.213 C01
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $4,687 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut. On or about April 28, 2023, and at times prior thereto, employees used a table saw to cut pieces of wood without the use of a blade guard, exposing the employees to an amputation hazard from being struck-by the rotating blade.
Recent events (2)
- — I (S) $0
- — Z (S) $4687
1910.213 C02
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. On or about April 28, 2023, and at times prior thereto, employees used a table saw to rip cut pieces of wood without the use of a spreader, exposing employees to the hazard of being struck-by wood kicked back by the saw.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back towards the operator. On or about April 28, 2023, and at times prior thereto, employees used a table saw to rip cut pieces of wood without the use of kickback fingers, exposing employees to the hazard of being struck-by wood kicked back by the saw.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 B
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $4,687 · Current $2,344 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 pounds per square inch (psi). On or about April 28, 2023, and at times prior thereto, employees used compressed air for cleaning purposes in which the air pressure measured at over 30 psi. a. Employees use compressed air in the tool room measuring at 115 PSI , exposing the employees to the hazard of being struck-by the jet stream or foreign bodies in the eye(s). b. Employees used compressed air at the CNC machine measuring at 85 PSI, exposing the employees to the hazard of being struck-by the jet stream or foreign bodies in the eye(s).
Recent events (2)
- — I (S) $2343.5
- — Z (S) $4687
1910.1200 H01
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $4,687 · Current $2,344 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area. On or about April 28, 2023, and at times prior thereto, employees utilized chemicals and substances within the workplace, such as but not limited to paint and primers, without knowing the hazards of such, exposing those employees to hazardous materials.
Recent events (2)
- — I (S) $2343.5
- — Z (S) $4687
1904.29 A
- Issued
- Jul 5, 2023
- Abate by
- Jul 31, 2023
- Penalty
- Initial $1,000 · Current $500 Reduced
General-duty citation text
29 CFR 1904.29(a): The employer did not use an OSHA 300, 301 and 300A Form or equivalent. On or about April 28, 2023, and at times prior thereto, the employer did not create and maintain recordkeeping forms within the workplace for recordable work-related injuries and illnesses.
Recent events (2)
- — I (O) $500
- — Z (O) $1000
More inspections at Creative Custom Cabinets INC.
View Creative Custom Cabinets INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337110)
Jul 16, 2026
Wood-Mode LLC · KREAMER, PA
Jul 16, 2026
PKB Cabinetry · OAKLAND PARK, FL
Jul 15, 2026
Rostov, LLC · ORLANDO, FL
Jul 14, 2026
Wilson Cabinetry, LLC · RICHMOND HILL, GA
Jul 13, 2026
111585 - Prachar Cabinets INC · WILLOW RIVER, MN
More inspections in TX
Jul 17, 2026
Cornelius Nurseries, INC. · RICHMOND, TX
Jul 17, 2026
Holloway Houston, INC. · HOUSTON, TX
Jul 17, 2026
Voluntary Purchasing Groups, INC. · BONHAM, TX
Jul 16, 2026
Rnwbl · SNYDER, TX
Jul 16, 2026
United Rentals, INC. · WICHITA FALLS, TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346670821.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.