LEBANON, MO —
OSHA Inspection: SIEN LUMBER LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SIEN LUMBER LLC in 30841 HWY 5, LEBANON, MO 65536 (NAICS 321113). OSHA activity number 346689680.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SIEN LUMBER LLC
- Site address
- 30841 HWY 5
- City
- LEBANON
- State
- MO
- ZIP
- 65536
- Mailing
- 23651 IOWA ROAD, LEBANON, MO 65536
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 3
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.28 B06 I
- Issued
- Sep 29, 2023
- Abate by
- Oct 26, 2023
- Penalty
- Initial $3,349 · Current $1,675 Reduced
General-duty citation text
29 CFR 1910.28(b)(6)(i): 29 CFR 1910.28(b)(6)(i): The employer did not ensure that each employee less than 4 feet (1.2 m) above dangerous equipment is protected from falling into or onto the dangerous equipment by a guardrail system or a travel restraint system, unless the equipment is covered or guarded to eliminate the hazard. At the workplace located at 30841 HWY 5, Lebanon MO, employees were exposed to caught in hazards from a chain drag in the floor used to remove sawdust and debris, when the chain drag was not covered to protect employees from stepping into it.
Recent events (2)
- — I (S) $1674.5
- — Z (S) $3349
1910.133 A01
- Issued
- Sep 29, 2023
- Abate by
- Oct 26, 2023
- Penalty
- Initial $4,688 · Current $0 Reduced
General-duty citation text
29 CFR 1910.133(a)(1):Protective eye equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment: At the workplace located at 30841 HWY 5, Lebanon MO, employees were exposed to struck by hazards when eye protection was not used while building pallets with a pneumatic nail gun.
Recent events (2)
- — I (S) $0
- — Z (S) $4688
1910.147 C01
- Issued
- Sep 29, 2023
- Abate by
- Oct 26, 2023
- Penalty
- Initial $4,688 · Current $2,813 Reduced
General-duty citation text
29 CFR 1910.147(c)(1):The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: At the workplace located at 30841 HWY 5, Lebanon MO, employees were exposed to caught in hazards on a gang saw while employees were attempting to clear a jam. The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections for any machines in the facility.
Recent events (2)
- — I (S) $2812.8
- — Z (S) $4688
1910.178 L01 I
- Issued
- Sep 29, 2023
- Abate by
- Oct 26, 2023
- Penalty
- Initial $2,679 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i):The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): At the workplace located at 30841 HWY 5, Lebanon MO, employees were exposed to struck by hazards when the employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation.
Recent events (2)
- — I (S) $0
- — Z (S) $2679
1910.212 A01
- Issued
- Sep 29, 2023
- Abate by
- Oct 26, 2023
- Penalty
- Initial $4,688 · Current $2,813 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: At the workplace located at 30841 HWY 5, Lebanon MO, employees were exposed to rotating parts and point of operation hazards from a gang saw when the time delay box was inoperable, which allowed the door guarding the saw blades and feed rolls to be opened with the machine running.
Recent events (2)
- — I (S) $2812.8
- — Z (S) $4688
1904.39 A02
- Issued
- Sep 29, 2023
- Penalty
- Initial $3,349 · Current $1,675 Reduced
General-duty citation text
29 CFR 1904.39(a)(2):The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. At the workplace located at 30841 HWY 5, Lebanon MO, the employer did not report an amputation resulting from a work-related incident to OSHA within 24 hours. An employee amputation occurred on or about April 11, 2023. This amputation was reported on or about May 2, 2023.
Recent events (2)
- — I (O) $1674.5
- — Z (O) $3349
More inspections at Sien Lumber LLC
View Sien Lumber LLC's full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346689680.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.