DORAVILLE, GA —
OSHA Inspection: GREIF, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GREIF, INC. in 4069 WINTERS CHAPEL ROAD, DORAVILLE, GA 30360 (NAICS 322130). OSHA activity number 346702830.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GREIF, INC.
- Site address
- 4069 WINTERS CHAPEL ROAD
- City
- DORAVILLE
- State
- GA
- ZIP
- 30360
- Mailing
- 425 WINTER ROAD, DELAWARE, OH 43015
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322130
- Employees
- 35
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.22 A01
- Issued
- Oct 31, 2023
- Penalty
- Initial $7,366 · Current $5,156 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition. a) Production Floor: On or about 05/15/2023, and at times prior, the employer exposed employees to trip hazards, in that the walking/working surfaces were not maintained in a clean and orderly condition while employees were working in the area and removing plastic and metal wastes from the cardboard bailer line.
Recent events (2)
- — I (S) $5156.2
- — Z (S) $7366
1910.22 D01
- Issued
- Oct 31, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(d)(1):The employer did not ensure that walking-working surfaces were inspected, regularly and as necessary, and maintained in a safe condition: a) Production Floor: On or about 05/15/2023, and at times prior, the employer exposed employees to trip hazards, in that the employer failed to ensure that walking/working surfaces were inspected and kept in a safe condition prior to employees working on the floor with floor opening of approximately 6 inch in depth.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.28 B01 I
- Issued
- Oct 31, 2023
- Penalty
- Initial $14,733 · Current $0 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that was 4 feet (1.2 m) or more above a lower level was protected from falling by one or more of the following: a) Production Floor/at Bailer 1 : On or about 05/15/2023, and at times prior, the employer exposed employees to fall hazards in that, the employer failed to ensure that employees were protected from falling while walking/working on a surface with an unprotected edge that was above 4 feet above the a lower level. b) Production Floor/at Bailer 2: On or about 05/15/2023, and at times prior, the employer exposed employees to fall hazards in that, the employer failed to ensure that employees were protected from falling while walking/working on a surface with an unprotected edge that was above 4 feet above the a lower level.
Recent events (2)
- — I (S) $0
- — Z (S) $14733
1910.178 N06
- Issued
- Oct 31, 2023
- Abate by
- Nov 28, 2023
- Penalty
- Initial $14,733 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(n)(6): The forklift operator driver did not keep a clear view of the path of travel: a) Production Floor: On or about 05/15/2023, and at times prior, the employer exposed employees to struck-by hazards in that, the employer failed to ensure that forklift operators had a clear view of the path of travel while they were allowed to drive in the forward direction with the load obstructing their views.
Recent events (2)
- — I (S) $0
- — Z (S) $14733
1910.212 A01
- Issued
- Oct 31, 2023
- Penalty
- Initial $12,278 · Current $8,595 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazards created by in-going nip points, rotating parts, and/or flying chips and sparks: a) Production Floor: On or about 05/15/2023, and at times prior, the employer exposed employees to amputation hazards, in that a method of machine guarding was not provided for the ejector cylinder of Bailer #1 (918) while employees were working with the bailer and/or engaged in work around the operational bailer.
Recent events (2)
- — I (S) $8594.6
- — Z (S) $12278
More inspections at Greif, INC.
View Greif, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 322130)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346702830.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.