SCHILLER PARK, IL —
OSHA Inspection: MANOR TOOL AND MANUFACTURING CO.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MANOR TOOL AND MANUFACTURING CO. in 9200 IVANHOE STREET, SCHILLER PARK, IL 60176 (NAICS 332119). OSHA activity number 346713381.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Manor Tool and Manufacturing CO. — free
Get an email when a new federal OSHA severe-injury report for Manor Tool and Manufacturing CO. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- MANOR TOOL AND MANUFACTURING CO.
- Site address
- 9200 IVANHOE STREET
- City
- SCHILLER PARK
- State
- IL
- ZIP
- 60176
- Mailing
- 9200 IVANHOE STREET, SCHILLER PARK, IL 60176
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332119
- Employees
- 55
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 F03 II D
- Issued
- Aug 9, 2023
- Abate by
- Aug 28, 2023
- Penalty
- Initial $10,938 · Current $11,250
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device, group lockbox, or comparable mechanism when he or she begins work, and shall remove those devices when he or she stops working on the machine or equipment being serviced or maintained. a) On or about February 27, 2023, employees did not affix their personal lockout or tagout devices to a group lock out device on the main electrical shut off that powered Egan Presspartner Straightener 237B prior to maintenance being performed. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — F (S) $11250
- — C (S) $10938
- — Z (S) $10938
1910.147 D
- Issued
- Aug 9, 2023
- Abate by
- Aug 28, 2023
- Penalty
- Initial $125,007 · Current $11,250 Reduced
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): a) On or about February 27, 2023, employees were exposed to machine hazards associated with moving parts such as steel rollers when servicing and polishing the rollers on the Egan Presspartner Straightener 237B. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy ([d)(5)], and verification of isolation [(d)(5)] were not implemented to protect employees from machine servicing hazards. b) On February 28, 2023, company employee was exposed to machine hazards associated with moving parts such as steel rollers when servicing and polishing the rollers on the Egan Presspartner Straightener 237B. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy ([d)(5)], and verification of isolation [(d)(5)] were not implemented to protect employees from machine servicing hazards. c) On or about February 28, 2023, company employee was exposed to machine hazards associated with moving parts such as steel rollers when servicing and polishing the rollers on the Egan Presspartner Straightener 237B. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy ([d)(5)], and verification of isolation [(d)(5)] were not implemented to protect employees from machine servicing hazards. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — F (S) $11250
- — C (W) $125007
- — Z (W) $125007
1910.147 D
- Issued
- Aug 9, 2023
- Abate by
- Aug 28, 2023
- Penalty
- Initial $11,250 · Current $11,250
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): a) On or about February 27, 2023, employees were exposed to machine hazards associated with moving parts such as steel rollers when servicing and polishing the rollers on the Egan Presspartner Straightener 237B. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy ([d)(5)], and verification of isolation [(d)(5)] were not implemented to protect employees from machine servicing hazards. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — C (S) $11250
- — F (S) $11250
- — Z (S) $11250
1910.147 D
- Issued
- Aug 9, 2023
- Abate by
- Aug 28, 2023
- Penalty
- Initial $11,250 · Current $11,250
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): a) On February 28, 2023, company employee was exposed to machine hazards associated with moving parts such as steel rollers when servicing and polishing the rollers on the Egan Presspartner Straightener 237B. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy ([d)(5)], and verification of isolation [(d)(5)] were not implemented to protect employees from machine servicing hazards. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — C (S) $11250
- — F (S) $11250
- — Z (S) $11250
More inspections at Manor Tool and Manufacturing CO.
View Manor Tool and Manufacturing CO.'s full OSHA safety record →
More inspections in this industry (NAICS 332119)
Jul 9, 2026
Hialeah Metal Spinning, INC. · HIALEAH, FL
Jun 9, 2026
Hoosier Stamping & MFG Corp · EVANSVILLE, IN
May 20, 2026
Metalworks Stamping Corporation · LYNDON STATION, WI
May 20, 2026
Precision Industries, INC. · PORTLAND, TN
May 5, 2026
Synergy Prototype Stamping LLC · CLINTON TOWNSHIP, MI
More inspections in IL
Jul 17, 2026
Quantum Technical Services INC. · FRANKFORT, IL
Jul 17, 2026
Augustana College · ROCK ISLAND, IL
Jul 17, 2026
Sunrun Installation Services, INC. · WASHINGTON, IL
Jul 17, 2026
Conservation of Sculpture & Objects Studio, INC. · FOREST PARK, IL
Jul 17, 2026
Proflow Pumping Solutions · BLUE ISLAND, IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346713381.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.