OSHA Inspection: ONSIZE MANUFACTURING LLC

Issued

2023-10-13 00:00:00

Abate by

2023-12-01 00:00:00

Penalty

Initial $2009.00 · Current $2009.00

General-duty citation text

29 CFR  1910.132(d)(2):The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed.  On or about June 22, 2023, the employer failed to verify through written certification that a workplace hazard assesment had been performed for employees operating the CNC machines.

Issued

2023-10-13 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.132(f)(1): The employer did not provide training to each employee who is required by this section to use personal protective equipment.  On or about June 22, 2023, the employer did not provide training to employees operating CNC machine that are required to use personal protective equipment such as safety glasses.

Issued

2023-10-13 00:00:00

Penalty

Initial $2679.00 · Current $2679.00

General-duty citation text

29 CFR  1910.178(l)(1)(i):The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).  On or about June 22, 2023, the employer failed to ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely when employees did not receive initial training on driving the propane powered Yale forklift at the facility.

Issued

2023-10-13 00:00:00

Penalty

Initial $2679.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.242(b):Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i..  On or about June 22, 2023, the employer failed to ensure compressed air used for cleaning purposes was reduced to less than 30 p.s.i. for the compressed air used to clean parts in the Hyundai WIA SE2200 L4 CNC machine.

Issued

2023-10-13 00:00:00

Penalty

Initial $2009.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii).  On or about June 22, 2023, the employer failed to develop, implement, and maintain a written hazard communication program at the workplace. Employees are exposed to hazardous chemicals to include, but are not limited to, Buckeye 150 HYD., 68 Waylube, and 10-24 used in the CNC machines.

Issued

2023-10-13 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area.  On or about June 22, 2023, the employer did not provide information and training on hazardous chemicals in the workplace to include, but are not limited to, Buckeye 150 HYD., 68 Waylube, and 10-24 oils used in the CNC machines.