Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: NASSAL FABRICATION SERVICES INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of NASSAL FABRICATION SERVICES INC. in 415 WEST KALEY STREET, ORLANDO, FL 32806 (NAICS 325220). OSHA activity number 346804636.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Nassal Fabrication Services INC. — free Get an email when a new federal OSHA severe-injury report for Nassal Fabrication Services INC. is published. One employer, no account, unsubscribe in one click.
Site address
415 WEST KALEY STREET
City
ORLANDO
State
FL
ZIP
32806
Mailing
415 WEST KALEY STREET, ORLANDO, FL 32806
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
325220
Employees
70
Ownership type
A

7 citations on file for this inspection.

1910.22 A01

Other-than-serious Gravity 1 3 instances 35 exposed
Issued
Nov 28, 2023
Penalty
Initial $6,026 · Current $4,218 Reduced
29 CFR  1910.22(a)(1): The employer did not ensure that all places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition.  a.) On or about June 29, 2023, in the Carpenter Shop: Employees were exposed to excessive amounts of dust on the floor, ceilings, walls, and equipment tables.  b.) On or about June 29, 2023, in the High Bay Area where Fiberglass is grinded and sanded and bags of  Glass Fiber Reinforced Concrete (GFRC) are opened:  the floor and work area was not kept clean and orderly, in that there was a significant buildup of GFRC dust, and molds and other materials were being stored haphazardly throughout the area.    c.) On or about June 29, 2023, in the Casting Area: The area was not kept clean and orderly due to the fiberglass and styrene mixture overspray, along with fiberglass materials, trash, and hoses being strewn across the floor.
Recent events (2)
  • — I (O) $4218.2
  • — Z (S) $6026

1910.134 C01

Other-than-serious Gravity 1 7 instances 10 exposed
Issued
Nov 28, 2023
Penalty
Initial $6,026 · Current $4,218 Reduced

Hazardous substances 22809000

29 CFR  1910.134(c)(1):  A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:   a.) On or about June 29, 2023,  in the Casting Department and High Bay, employees were required to wear 8210 N95 respirators and half-face elastomeric respirators to  protect them from Glass Fiber Reinforced Concrete (GFRC) and organic vapor exposures while grinding or sanding on GFRC molds, and when spraying and rolling resin coatings, styrene, and other organic vapors mixtures and the employer had not implemented a worksite-specific respiratory protection program.
Recent events (2)
  • — I (O) $4218.2
  • — Z (S) $6026

1910.134 E01

Other-than-serious Gravity 1 6 instances 10 exposed
Issued
Nov 28, 2023
Penalty
Initial $0 · Current $0

Hazardous substances 22809130

29 CFR  1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  a.) On or about 6/29/2023, in the Casting Department and High Bay, employees were required to wear 8210 N95 respirators and half-face elastomeric respirators to  protect them from Glass Fiber Reinforced Concrete (GFRC) and organic vapor exposures while grinding or sanding on GFRC molds, and when spraying and rolling resin coatings, styrene , and other organic vapors mixtures and the employer had not provided medical evaluations to each employee required to use a respirator.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.134 F02

Other-than-serious Gravity 1 4 instances 10 exposed
Issued
Nov 28, 2023
Penalty
Initial $0 · Current $0

Hazardous substances 2280

29 CFR  1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator:  a.) On or about 6/29/2023, in the Casting Department and High Bay, employees were required to wear 8210 N95 respirators and half-face elastomeric respirators to protect them from Glass Fiber Reinforced Concrete (GFRC) and organic vapor exposures while grinding or sanding on GFRC molds, and when spraying and rolling resin coatings, styrene, and other organic vapors mixtures, and the employer had not provided a fit test to each employee.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.134 G01 I A

Other-than-serious Gravity 1 2 instances 7 exposed
Issued
Nov 28, 2023
Penalty
Initial $0 · Current $0

Hazardous substances 2280

29 CFR  1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function:  a.) On or about 6/29/2023,  in the Casting Department and High Bay, employees were required to wear 8210 N95 respirators and half-face elastomeric respirators to  protect them from Glass Fiber Reinforced Concrete (GFRC) and organic vapor exposures while grinding or sanding on GFRC molds, and when spraying and rolling resin coatings, styrene, and other organic vapors mixtures and two employees had facial hair that came between the sealing surface of the facepiece and the face.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.134 K

Deleted Serious Gravity 5 1 instance 10 exposed
Issued
Nov 28, 2023
Penalty
Initial $0 · Current $0

Hazardous substances 2280

29 CFR  1910.134(k): The employer did not provide comprehensive, understandable training which did not occur annually and/or more often if necessary:  a.) On or about 06/29/2023,  in the Casting Department and High Bay, employees were required to wear 8210 N95 respirators and half-face elastomeric respirators to  protect them from Glass Fiber Reinforced Concrete (GFRC) and organic vapor exposures while grinding or sanding on GFRC molds, and when spraying and rolling resin coatings, styrene, and other organic vapors mixtures, and the employer had not provided the employees with respiratory protection training.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Other-than-serious Gravity 1 2 instances 10 exposed
Issued
Nov 28, 2023
Penalty
Initial $6,026 · Current $4,218 Reduced

Hazardous substances 2280

29 CFR  1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:   a.) On or about June 29, 2023, in the Casting Department and High Bay, employees were exposed to hazardous chemicals including, but not limited to, Glass Fiber Reinforced Concrete (GFRC) while grinding or sanding on GFRC molds, and when spraying and rolling resin coatings, styrene, and other organic vapors mixtures, and the employer had not provided effective hazard communication training on the health hazards associated with these chemicals.
Recent events (2)
  • — I (O) $4218.2
  • — Z (S) $6026

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346804636.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.