Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RENE OLVERA

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of RENE OLVERA in 305 BIRCH CT, CANTON, MS 39046 (NAICS 238130). OSHA activity number 346813280.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rene Olvera — free Get an email when a new federal OSHA severe-injury report for Rene Olvera is published. One employer, no account, unsubscribe in one click.
Establishment
RENE OLVERA
Site address
305 BIRCH CT
City
CANTON
State
MS
ZIP
39046
Mailing
901 PRINCE DR., BRANDON, MS 39042
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
7
Ownership type
A

3 citations on file for this inspection.

1926.501 B13

Repeat Gravity 5 1 instance 3 exposed
Issued
Aug 18, 2023
Abate by
Oct 3, 2023
Penalty
Initial $6,697 · Current $3,349 Reduced
29 CFR  1926.501(b)(13):Employees engaged in residential construction activities 6 feet (1.8m) or more above the lower levels were not protected by guardrail systems, safety net systems, or personal fall arrest systems:  (a)	Jobsite -  On or about July 6, 2023, employees were on the performing framing activities at a height of approximately 19 feet without a means of fall protection, exposing them to fall hazards.  Rene Olvera was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR  1926.501(b)(13), which was contained in OSHA inspection number 1619692, citation number 1, item number 4-a and was affirmed as a final order on 04/14/2023, with respect to a workplace located at 133 Ashby Ridge Drive, Canton, MS 39046.
Recent events (2)
  • — I (R) $3348.5
  • — Z (R) $6697

1926.451 B02

Repeat Gravity 5 1 instance 3 exposed
Issued
Aug 18, 2023
Abate by
Oct 3, 2023
Penalty
Initial $6,697 · Current $3,349 Reduced
29 CFR  1926.451(b)(2):Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and/or walkway was not at least 18 inches (46 cm) wide.  a) Jobsite - On or about July 6, 2023, employees were using a scaffold built using boards of wood that were not at least 18 inches at a height of approximately 19 feet, exposing employees to fall hazards.  Rene Olvera was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR  1926.451(b)(2), which was contained in OSHA inspection number 1619692, citation number 1, item number 2 and was affirmed as a final order on 04/14/2023, with respect to a workplace located at 133 Ashby Ridge Drive, Canton, MS 39046.
Recent events (2)
  • — I (R) $3348.5
  • — Z (R) $6697

1926.451 G01

Repeat Gravity 5 1 instance 3 exposed
Issued
Aug 18, 2023
Abate by
Oct 3, 2023
Penalty
Initial $6,697 · Current $3,349 Reduced
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1m) above a lower level was not protected from falling to that lower level by fall protection established in accordance with paragraphs (g)(1)(i) through (vii) of this section:  a) Jobsite - On or about July 6, 2023, employees were observed working on a scaffold more than 10 feet above a lower level without a means of fall protection, exposing them to fall hazards.  Rene Olvera was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.451(g)(1), which was contained in OSHA inspection number 1619692, citation number 1, item number 4-b and was affirmed as a final order on 04/14/2023, with respect to a workplace located at 133 Ashby Ridge Drive, Canton, MS 39046.
Recent events (2)
  • — I (R) $3348.5
  • — Z (R) $6697

View Rene Olvera's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346813280.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.