MENASHA, WI —
OSHA Inspection: GUNDERSON, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GUNDERSON, INC. in 41 MAIN STREET, MENASHA, WI 54952 (NAICS 812332). OSHA activity number 346851116.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GUNDERSON, INC.
- Site address
- 41 MAIN STREET
- City
- MENASHA
- State
- WI
- ZIP
- 54952
- Mailing
- 41 MAIN STREET, MENASHA, WI 54952
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 812332
- Employees
- 75
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.212 A01
- Issued
- Dec 14, 2023
- Penalty
- Initial $9,222 · Current $6,455 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc. On or about July 21, 2023, at an establishment located at 41 Main Street in Menasha, Wisconsin, the employer did not provide machine guarding to protect operators and other employees on the production floor from hazards, such but not limited to: a) On or about July 21, 2023, in the Folding Dept, the employer did not protect employees from the ingoing nip points presented by the conveyor on the back side of FT Maxi fold machine. b) On or about July 21, 2023, in the Folding Dept, the employer did not protect employees from the ingoing nip points presented by the conveyor on the back side of Chicago fold machine #1. c) On or about July 21, 2023, in the Folding Dept, the employer did not protect employees from the ingoing nip points presented by the conveyor on fold conveyor #1. d) On or about July 21, 2023, in the Folding Dept, the employer did not protect employees from the ingoing nip points presented by the route make up conveyor on the driven side of the conveyor in the fold dept. e) On or about July 21, 2023, in the Route Make-Up Dept, the employer did not protect employees from the ingoing nip points presented by the route make up conveyor at the drive side of the conveyor. f) On or about July 21, 2023, on the Voss Line, the employer did not protect employees from the automated shuttle. g) On or about July 21, 2023, on the Gerbau Line, the employer did not protect employees from the automated shuttle.
Recent events (2)
- — I (O) $6455.4
- — Z (S) $9222
1910.219 C02 I
- Issued
- Dec 14, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, shall be protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top or sides and bottom of shafting as location requires. On or about July 21, 2023, at an establishment located at 41 Main Street in Menasha, Wisconsin, the employer did not provide machine guarding to protect operators and other employees on the production floor from hazards of a horizontal shaft on the driven side of the route make up conveyor in the Fold Dept.
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections at Gunderson, INC.
View Gunderson, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 812332)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346851116.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.