YAZOO CITY, MS —
OSHA Inspection: YAZOO LUMBER & MATS
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of YAZOO LUMBER & MATS in 22666 MISSISSIPPI 3, YAZOO CITY, MS 39194 (NAICS 321113). OSHA activity number 346870801.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- YAZOO LUMBER & MATS
- Site address
- 22666 MISSISSIPPI 3
- City
- YAZOO CITY
- State
- MS
- ZIP
- 39194
- Mailing
- 22666 MISSISSIPPI 3, YAZOO CITY, MS 39194
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 22
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.303 G01
- Issued
- Sep 29, 2023
- Abate by
- Oct 24, 2023
- Penalty
- Initial $2,678 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: (a) Maintenance Shop - On or about August 01, 2023, the employer did not ensure there was a 3 feet clearance in front of the electrical panels, exposing the employees to electrical hazards. (b) File Sharpening Room - On or about August 01, 2023, the employer did not ensure there was a 3 feet clearance in front of the electrical panels, exposing the employees to electrical hazards.
Recent events (2)
- — I (O) $2500
- — Z (S) $2678
1910.305 B02
- Issued
- Sep 29, 2023
- Abate by
- Oct 24, 2023
- Penalty
- Initial $2,678 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.305(b)(2): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: (a) Mill C - On or about August 1, 2023, electrical panels did not have covers exposing e to electrical hazards.
Recent events (2)
- — I (O) $2500
- — Z (S) $2678
1910.212 A
- Issued
- Sep 29, 2023
- Abate by
- Oct 24, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. (a) Mill C - On or about August 01, 2023, the employer did not provide fixed guarding at the end of the conveyor for the trim saw, exposing employees to a caught by hazard.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.219 C04 I
- Issued
- Sep 29, 2023
- Abate by
- Oct 24, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded shaft end(s) projected more than one half the diameter of the shaft. (a) Mill C - On or about August 01, 2023, the employer did not provide guarding for rotating shafts exposing the employees to the hazard of being entangled in moving parts.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 B07 I
- Issued
- Sep 29, 2023
- Abate by
- Oct 24, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(7)(i): Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings shall be effectively closed to afford protection substantially equivalent to the wall of the equipment. (a) Mill C: Control Room - On or about August 01, 2023, the employer did not ensure knockouts were covered, exposing the employees to electrical hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.334 A02 I
- Issued
- Sep 29, 2023
- Abate by
- Oct 24, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(i): Portable cord- and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence for possible internal damage (such as pinched or crushed outer jacket). Mill P - On or about August 01, 2023, the employer did not ensure cords attached to fans in the workplace were inspected prior to use, exposing employees to a shock hazard.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Yazoo Lumber & Mats
View Yazoo Lumber & Mats's full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346870801.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.