Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DOOSAN BOBCAT, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of DOOSAN BOBCAT, INC. in 1 BOBCAT LANE, JOHNSON CREEK, WI 53038 (NAICS 333112). OSHA activity number 346908833.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Doosan Bobcat, INC. — free Get an email when a new federal OSHA severe-injury report for Doosan Bobcat, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
DOOSAN BOBCAT, INC.
Site address
1 BOBCAT LANE
City
JOHNSON CREEK
State
WI
ZIP
53038
Mailing
1 BOBCAT LANE, JOHNSON CREEK, WI 53038
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333112
Employees
320
Ownership type
A

6 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 10 2 instances 14 exposed
Issued
Aug 29, 2023
Abate by
Oct 2, 2023
Penalty
Initial $15,625 · Current $11,718 Reduced
29 CFR  1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a) On or about August 15, 2023, hazardous energy control procedures were not utilized for die change activities on the Toyokoki Press Brake  (APB 286u) located in the fabrication department.   b) On or about August 15, 2023, hazardous energy control procedures were not utilized for die change activities on the Toyokoki Press Brake  (APB 184) located in the fabrication department.
Recent events (2)
  • — I (S) $11718
  • — Z (S) $15625

1910.147 C04 II

Serious Gravity 10 2 instances 14 exposed
Issued
Aug 29, 2023
Abate by
Sep 13, 2023
Penalty
Initial $15,625 · Current $0 Reduced
29 CFR 1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D):  a) On or about August 23, 2023, hazardous energy control procedures for the Toyokoki Press Brakes did not include a specific statement of the intended use pursuant to 29 CFR 1910.147(c)(4)(ii)(A).   b) On or about August 23, 2023, the hazardous energy control procedure for the Toyokoki Press Brakes did not state how the authorized employees would verify a total de-energized state pursuant to 29 CFR 1910.147(c)(4)(ii)(D).
Recent events (2)
  • — I (S) $0
  • — Z (S) $15625

1910.147 C07 I

Serious Gravity 10 2 instances 14 exposed
Issued
Aug 29, 2023
Abate by
Sep 13, 2023
Penalty
Initial $15,625 · Current $11,718 Reduced
29 CFR  1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices:  a) On or about August 15, 2023, press brake operators have not been trained on hazardous energy control procedures when engaged in covered activities such as die changes on the Toyokoki Press Brake (APB 286u) located in the fabrication department.   b) On or about August 15, 2023, press brake operators have not been trained on hazardous energy control procedures when engaged in covered activities such as die changes on the Toyokoki Press Brake (APB 184) located in the fabrication department.
Recent events (2)
  • — I (S) $11718
  • — Z (S) $15625

1910.212 A03 II

Serious Gravity 10 2 instances 14 exposed
Issued
Aug 29, 2023
Abate by
Sep 13, 2023
Penalty
Initial $15,625 · Current $11,718 Reduced
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):   a) On or about August 15, 2023, light curtain devices were bypassed via a mute switch located behind the Toyokoki Press Brake (APB 286u) in the fabrication department. Operator hands immediately next to the point of operation during cycles approximately less than 3 inches.   b) On or about August 15, 2023, light curtain devices were bypassed via a mute switch located behind the Toyokoki Press Brake (APB 184) in the fabrication department. Operator hands immediately next to the point of operation during cycles approximately less than 3 inches.
Recent events (2)
  • — I (S) $11718
  • — Z (S) $15625

1910.252 B02 III

Serious Gravity 5 1 instance 14 exposed
Issued
Aug 29, 2023
Abate by
Sep 13, 2023
Penalty
Initial $13,394 · Current $6,696 Reduced
29 CFR  1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields:  On or about August 15, 2023, the welding area was not provided with sufficient welding screens to protect the workers in adjacent areas, exposing the employees to the arc welding rays.
Recent events (2)
  • — I (S) $6696
  • — Z (S) $13394

1910.147 C06 I

Other-than-serious 1 instance 14 exposed
Issued
Aug 29, 2023
Abate by
Feb 1, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  On or about August 23, 2023, and times prior, the employer failed to conduct periodic inspections of equipment including but not limited to the Toyokoki Press Brake written hazardous energy control procedure at least once annually.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Doosan Bobcat, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346908833.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.