LUBBOCK, TX —
OSHA Inspection: RAMSEY AIR MANAGEMENT, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of RAMSEY AIR MANAGEMENT, INC. in 702 EAST 34TH STREET, LUBBOCK, TX 79404 (NAICS 333111). OSHA activity number 346912363.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RAMSEY AIR MANAGEMENT, INC.
- Site address
- 702 EAST 34TH STREET
- City
- LUBBOCK
- State
- TX
- ZIP
- 79404
- Mailing
- P.O. BOX 64370, LUBBOCK, TX 79464
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333111
- Employees
- 8
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.217 B05 I
- Issued
- Nov 13, 2023
- Abate by
- Dec 12, 2023
- Penalty
- Initial $10,938 · Current $6,563 Reduced
General-duty citation text
29 CFR 1910.217(b)(5)(i): Hand-lever-operated power presses shall be equipped with a spring latch on the operating lever to prevent premature or accidental tripping. On or about August 16, 2023, Employees at the work site were exposed to caught-in hazards while operating a quick change stamping press without the use of a spring latch.
Recent events (2)
- — I (S) $6562.8
- — Z (S) $10938
1910.217 C01 I
- Issued
- Nov 13, 2023
- Abate by
- Dec 12, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(c)(1)(i): It shall be the responsibility of the employer to provide and insure the usage of "point of operation guards" or properly applied and adjusted point of operation devices on every operation performed on a mechanical power press. On or about August 16, 2023, Employees at the work site were exposed to caught-in hazards while operating a quick change stamping press without the use of a machine guards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 F01
- Issued
- Nov 13, 2023
- Abate by
- Dec 12, 2023
- Penalty
- Initial $10,938 · Current $6,563 Reduced
General-duty citation text
29 CFR 1910.219(f)(1): Gear(s) were not guarded by a complete enclosure or by one of the methods specified in 29 CFR 1910.219(f)(1)(i), (f)(1)(ii) and (f)(1)(iii). On or about August 16, 2023, Employees at the work site were exposed to caught-in hazards while operating a quick change stamping press without the use of guards.
Recent events (2)
- — I (S) $6562.8
- — Z (S) $10938
1904.39 A02
- Issued
- Nov 13, 2023
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): Basic Requirement. Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA. On or about August 16, 2023, the employer failed to report an in-patient hospitalization due to employee amputation to the Occupational Safety and Health Administration, U.S. Department of Labor within twenty-four (24) hours.
Recent events (2)
- — I (O) $1200
- — Z (O) $2000
More inspections in this industry (NAICS 333111)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346912363.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.