SOUTH AMBOY, NJ —
OSHA Inspection: Z BROTHERS CONCRETE CONTRACTORS, INC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of Z BROTHERS CONCRETE CONTRACTORS, INC in 116 - 190 S FELTUS ST, SOUTH AMBOY, NJ 08879 (NAICS 238110). OSHA activity number 346927627.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- Z BROTHERS CONCRETE CONTRACTORS, INC
- Site address
- 116 - 190 S FELTUS ST
- City
- SOUTH AMBOY
- State
- NJ
- ZIP
- 08879
- Mailing
- 304 JERNEE MILL RD, SAYREVILLE, NJ 08872
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238110
- Employees
- 11
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.1153 C01
- Issued
- Feb 9, 2024
- Penalty
- Initial $8,067 · Current $4,437 Reduced
9000
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section. a) 116 - 190 S. Feltus St South Amboy, NJ 08879 Employee(s) including operator(s) of hand-held power saw and other laborer(s) working on sidewalk were exposed to the hazard of crystalline silica inhalation due to lack of the employer's failure to implement engineering controls prescribed in Table-1 for control of dust. Employee(s) used a STIHL TS-420 portable power saw without integrated water delivery system for continuously feeding water to the blade while cutting concrete sidewalk(s). Conditions noted on or about August 23, 2023.
Recent events (2)
- — I (S) $4436.8
- — Z (S) $8067
1926.1153 D02 I
- Issued
- Feb 9, 2024
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1926.1153(d)(2)(i):The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section: a) 116 - 190 S Feltus St South Amboy, NJ 08879 Employee(s) including operator(s) of hand-held power saw and other laborer(s) working on sidewalk were exposed to the hazard of crystalline silica inhalation due to the employer's failure to fully and properly implement dust control method(s) prescribed for task(s) listed in Table-1 when working on materials containing crystalline silica. Employee(s) used a STIHL TS-420 portable power saw without integrated water delivery system for continuously feeding water to the blade while cutting concrete sidewalk(s). Where the control measures prescribed in Table-1 were not implemented, the employer did not assess employees' exposure to crystalline silica through air monitoring. Conditions noted on or about August 23, 2023.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1153 G01
- Issued
- Feb 9, 2024
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1926.1153(g)(1):The employer did not establish and implement a written exposure control plan: a) 116 - 190 S Feltus St South Amboy, NJ 08879 Employee(s) including operator(s) of hand-held power saw and other laborer(s) working on the sidewalk were exposed to the hazard of crystalline silica inhalation due to lack of the employer's failure to implement engineering controls prescribed in Table-1 for control of dust. Employee(s) used a Stihl TS-420 portable power saw without integrated water delivery system for continuously feeding water to the blade while cutting concrete sidewalk(s). A plan for controlling exposure to crystalline silica dust on jobsites was not developed & implemented by the employer. Conditions noted on or about August 23, 2023.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Z Brothers Concrete Contractors, INC
View Z Brothers Concrete Contractors, INC's full OSHA safety record →
More inspections in this industry (NAICS 238110)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346927627.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.