BYRON, GA —
OSHA Inspection: SERGIO ARRIAGA SANCHEZ
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SERGIO ARRIAGA SANCHEZ in 196 PRICE MILL TRAIL LOT 295, BYRON, GA 31008 (NAICS 238130). OSHA activity number 347017493.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SERGIO ARRIAGA SANCHEZ
- Site address
- 196 PRICE MILL TRAIL LOT 295
- City
- BYRON
- State
- GA
- ZIP
- 31008
- Mailing
- 1156 SEATTLE SLEW LANE, NORCROSS, GA 30093
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Oct 13, 2023
- Penalty
- Initial $2,679 · Current $2,679
General-duty citation text
29 CFR 1926.102(a)(1): Employees did not use eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: a) New residential construction at Lot #295: On or about 10/05/2023, employees were exposed to struck-by hazards while operating pneumatic framing nail guns, in that protective eyewear was not provided while engaged in framing activities using these tools at 120 PSI.
Recent events (1)
- — Z (S) $2679
1926.304 D
- Issued
- Oct 13, 2023
- Penalty
- Initial $2,679 · Current $2,679
General-duty citation text
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe: a) Residential construction on Lot #295; ground floor: On 10/5/2023, the employer exposed employees to severe lacerations and/or amputation hazards, in that the Makita 7-1/4-in. Circular Saw (Model 5007F) had a non-functional guard as it did not retract immediately after the cut was made.
Recent events (1)
- — Z (S) $2679
1926.501 B13
- Issued
- Oct 13, 2023
- Penalty
- Initial $4,018 · Current $4,018
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels was not protected by guardrail systems, safety net systems, personal fall arrest systems, or an alternative fall protection measure under another provision of paragraph 1926.501(b), nor did the employer demonstrate that it is infeasible or creates a greater hazard to use these systems and develop and implement a fall protection plan which meets the requirements of paragraph (k) of section 1926.502: a) Residential construction Lot 295, roof: On 10/5/2023, the employer exposed employees to fall hazards of approximately 10-feet to the lower level, in that a fall protection system was not provided to employees engaged in framing activities using plywood sheathing and trusses as a walking/working surfaces.
Recent events (1)
- — Z (S) $4018
1926.1053 B01
- Issued
- Oct 13, 2023
- Penalty
- Initial $2,679 · Current $2,679
General-duty citation text
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access: a) New residential construction at Lot #295: On 10/5/2023, the employer exposed employees to fall hazards of up to 9-feet to the lower ground level, in that a safe means of access to the upper level was not provided as employees used a 6-foot ladder to climb onto the roof.
Recent events (1)
- — Z (S) $2679
More inspections at Sergio Arriaga Sanchez
View Sergio Arriaga Sanchez's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347017493.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.