DURAND, WI —
OSHA Inspection: MARRON FOODS
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MARRON FOODS in 1220 HARDY ST, DURAND, WI 54736 (NAICS 311514). OSHA activity number 347021321.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARRON FOODS
- Site address
- 1220 HARDY ST
- City
- DURAND
- State
- WI
- ZIP
- 54736
- Mailing
- PO BOX 9, DURAND, WI 54736
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311514
- Employees
- 14
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.219 C02 I
- Issued
- Nov 1, 2023
- Abate by
- Nov 24, 2023
- Penalty
- Initial $5,313 · Current $3,719 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: (a) Production floor - base dump station auger; Two rotating shafts, coupled by a metal sleeve and two exposed shear pins, located at the base of a work platform were not encased or guarded.
Recent events (2)
- — I (S) $3719.1
- — Z (S) $5313
1910.219 C04 I
- Issued
- Nov 1, 2023
- Abate by
- Nov 24, 2023
- Penalty
- Initial $3,984 · Current $2,789 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: (a) Production floor - packaging elevator; On the left side of the packaging elevator, an unguarded, rotating shaft end, approximately 3/4 of an inch in diameter, projected approximately 11/16 of an inch.
Recent events (2)
- — I (S) $2788.8
- — Z (S) $3984
1910.219 C04 II
- Issued
- Nov 1, 2023
- Abate by
- Nov 24, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4)(ii): The unused keyway(s) of projecting shaft end(s) were not filled up or covered: (a) Production floor - base dump station auger; The right side of the Ironman (by Grove Gear) gear reducer (Model #GR-HMQ-842-40-H1-180-32) contained an exposed, rotating shaft end with a keyway that was not filled or guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 A02 I
- Issued
- Nov 1, 2023
- Abate by
- Dec 1, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(a)(2)(i): Temporary electrical power and lighting installations rated 600 volts, nominal, or less were used for purposes other than those permitted in subparagraphs (A), (B) and (C) of this paragraph: (a) Production floor - sealing machine (tube vibrators); Fixed electrical equipment was powered with the use of electrical extension cords.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Marron Foods
View Marron Foods's full OSHA safety record →
More inspections in this industry (NAICS 311514)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347021321.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.