Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RJ STAAB STONE COMPANY OF FLORIDA, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of RJ STAAB STONE COMPANY OF FLORIDA, LLC in 390 S SEABOARD DR., NEWBERRY, FL 32669 (NAICS 327390). OSHA activity number 347021875.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch RJ Staab Stone Company of Florida, LLC — free Get an email when a new federal OSHA severe-injury report for RJ Staab Stone Company of Florida, LLC is published. One employer, no account, unsubscribe in one click.
Site address
390 S SEABOARD DR.
City
NEWBERRY
State
FL
ZIP
32669
Mailing
390 S SEABOARD DRIVE, NEWBERRY, FL 32669
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
327390
Employees
5
Ownership type
A

5 citations on file for this inspection.

1910.213 C01

Willful Gravity 10 1 instance 1 exposed
Issued
Mar 12, 2024
Penalty
Initial $32,265 · Current $32,265
29 CFR  1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:  a. In the warehouse located at 390 South Seaboard Drive in Newberry, Florida 32669: On or about October 10th, and at times prior the employer exposed employees to amputation hazards in that they allow employees to operate the ripsaw without an automatically adjusting hood.
Recent events (1)
  • — Z (W) $32265

1910.213 C02

Willful Gravity 10 1 instance 1 exposed
Issued
Mar 12, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator:  a. In the warehouse located at 390 South Seaboard Drive in Newberry, Florida 32669: On or about October 10th, and at times prior the employer exposed employees to struck by hazards in that they allow employees to operate the ripsaw without a spreader that would prevent material from being thrown back at the operator.
Recent events (1)
  • — Z (W) $0

1910.213 C03

Willful Gravity 10 1 instance 1 exposed
Issued
Mar 12, 2024
Abate by
Apr 5, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.213(c)(3): Handfed ripsaw(s) did not have or were not provided with non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator:  a. In the warehouse located at 390 South Seaboard Drive in Newberry, Florida 32669: On or about October 10th, and at times prior the employer exposed employees to struck by hazards in that they allow employees to operate the ripsaw without kickback fingers or dogs which prevent material from being thrown back toward the operator.
Recent events (1)
  • — Z (W) $0

1910.213 H01

Serious Gravity 10 1 instance 1 exposed
Issued
Mar 12, 2024
Abate by
Apr 5, 2024
Penalty
Initial $4,839 · Current $4,839
29 CFR  1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the stock being cut to give maximum protection possible for the operation being performed.  a. In the warehouse located at 390 South Seaboard Drive in Newberry, Florida 32669: On or about October 10th, and at times prior the employer exposed employees to amputation hazards in that they allow employees to operate the radial saw (chop saw) without an upper hood which completely encloses the saw blade.
Recent events (1)
  • — Z (S) $4839

1910.178 L06

Repeat 1 instance 6 exposed
Issued
Mar 12, 2024
Abate by
Apr 5, 2024
Penalty
Initial $1,382 · Current $1,382
29 CFR  1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):   a. At RJ Staab Stone Company of Florida, LLC's warehouse located at 390 South Seaboard Drive, Welborne Florida, 32097: On or about October 10, 2023, and at times prior, the employer exposed employees to struck-by and crushed-by hazards, in that the employer did not certify that each operator has been trained and evaluated as required by this paragraph (l).  RJ Staab Stone Company of Florida, LLC was previously cited for a violation of this occupational safety and health standard, which was contained in OSHA inspection number 1440921, citation number 3, item number 1 and was affirmed as a final order on April 23, 2020, with respect to a workplace located at 824 North Main street, Willison Florida, 32696.
Recent events (1)
  • — Z (R) $1382

View RJ Staab Stone Company of Florida, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347021875.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.