Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CATALYST CONSTRUCTION

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of CATALYST CONSTRUCTION in MANGILAO MCDONALDS, MANGILAO, GU 96913 (NAICS 236220). OSHA activity number 347035164.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Catalyst Construction — free Get an email when a new federal OSHA severe-injury report for Catalyst Construction is published. One employer, no account, unsubscribe in one click.
Site address
MANGILAO MCDONALDS
City
MANGILAO
State
GU
ZIP
96913
Mailing
ONE TANAKA PLAZA STE 204 973 SOUTH MARINE CORPS DRIVE, TAMUNING, GU 96913
Inspection type
Unprogrammed Other (I)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
8
Ownership type
A

5 citations on file for this inspection.

1910.134 E01

Serious Gravity 1 1 instance 1 exposed
Issued
Dec 21, 2023
Abate by
Jan 19, 2024
Penalty
Initial $3,586 · Current $2,510 Reduced
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  Employees that were required to wear an N95 respirator while grinding cement were not medically cleared for use. Employees were exposed to respiratory hazards.
Recent events (2)
  • — I (S) $2510.2
  • — Z (S) $3586

1910.134 F02

Serious Gravity 1 1 instance 1 exposed
Issued
Dec 21, 2023
Abate by
Jan 19, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator:  Employees that were required to wear an N95 respirator while grinding concrete were not fit tested prior to respirator use. Employees were exposed to respiratory hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 G01 I A

Serious Gravity 1 1 instance 1 exposed
Issued
Dec 21, 2023
Abate by
Jan 11, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function:  At least one employee required to wear an N95 respirator while grinding concrete had facial hair that did not allow the respirator to have a tight seal. Employees were exposed to respiratory hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.652 A01

Serious Gravity 5 1 instance 5 exposed
Issued
Dec 21, 2023
Abate by
Jan 11, 2024
Penalty
Initial $5,977 · Current $4,184 Reduced
29 CFR 1926.652(a)(1): Each employee in an excavation was not protected from cave-ins by an adequate protective system designed in accordance with 29 CFR 1926.652 (b) or (c).  Percolation Chamber Excavation: Cave in protection was not provided for employees working in a trench greater than 5 feet in depth. Employees were exposed to engulfment hazards.
Recent events (2)
  • — I (S) $4183.9
  • — Z (S) $5977

1926.1153 C01

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 21, 2023
Abate by
Jan 11, 2024
Penalty
Initial $5,977 · Current $4,184 Reduced
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.  At the Catch Basin: Employees used a Milwaukee 4 1/2-inch grinder to grind concrete without any control measures implemented from Table 1-Specified Exposure Control Methods When Working with Materials Containing Crystalline Silica. Employees were exposed to respiratory hazards.
Recent events (2)
  • — I (S) $4183.9
  • — Z (S) $5977

View Catalyst Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347035164.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.