ROBBINSVILLE, NJ —
OSHA Inspection: RAS PROCESS EQUIPMENT INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of RAS PROCESS EQUIPMENT INC. in 324 MEADOWBROOK ROAD, ROBBINSVILLE, NJ 08691 (NAICS 332999). OSHA activity number 347037160.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RAS PROCESS EQUIPMENT INC.
- Site address
- 324 MEADOWBROOK ROAD
- City
- ROBBINSVILLE
- State
- NJ
- ZIP
- 08691
- Mailing
- 324 MEADOWBROOK ROAD, ROBBINSVILLE, NJ 08691
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 35
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.212 A03 II
- Issued
- Jan 3, 2024
- Abate by
- Mar 29, 2024
- Penalty
- Initial $12,031 · Current $7,200 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii):Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Production area: The spindle near the headstock assembly on the Okuma Lathe Model LT, Serial Number 4204-10972, was not guarded to protect employees against rotating parts on or about 11/15/23. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $7200
- — Z (S) $12031
1910.253 B02 II
- Issued
- Jan 3, 2024
- Abate by
- Jan 30, 2024
- Penalty
- Initial $6,875 · Current $3,700 Reduced
General-duty citation text
29 CFR 1910.253(b)(2)(ii):Inside of buildings, cylinders were not stored in a well-protected, well-ventilated, dry location, at least 20 feet (6.1 m) from highly combustible materials such as oil or excelsior: a)Production Floor, Cylinder Storage Area. Employer did not ensure that approximately 16 compressed gas cylinders, each with a capacity of 250 cubic feet of gas, were secured to prevent cylinder from being knocked over, exposing employees to a struck-by hazard. This condition was observed on or about October 17, 2023
Recent events (2)
- — I (S) $3700
- — Z (S) $6875
1910.178 L04 III
- Issued
- Jan 3, 2024
- Abate by
- Jan 30, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii):An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a)Yard: Employees who operate two propane forklifts (Mitsubishi Model FG35 Serial Number 29-00752 and TCM Model FG30N5T, Serial Number A31M71729) were not evaluated every three years per the requirements of this standard on or about 10/10/17/2023. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at RAS Process Equipment INC.
View RAS Process Equipment INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347037160.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.